HP NonStop TMF Programming Manual page 801

Error and Warning Messages
9050 Audit trail block header 0 is too short.
An audit dump process read the first audit-trail header and found it was shorter
than expected.
The ZEMS-TKN-EMPHASIS token is set to TRUE.
9051 Audit trail file is not file code 134.
The file code of the audit-trail file was not 134.
The ZEMS-TKN-EMPHASIS token is set to TRUE.
9052 Audit trail file is not an unstructured file.
The audit-trail file was not an unstructured file.
The ZEMS-TKN-EMPHASIS token is set to TRUE.
9054 Audit trail file is marked broken.
The audit-trail file was marked "broken."
The ZEMS-TKN-EMPHASIS token is set to TRUE.
9055 Audit trail file is corrupt.
While attempting to dump an audit-trail file, an audit dump process detected that
the file has been corrupted.
The ZEMS-TKN-EMPHASIS token is set to TRUE.
9056 Internal error (Audit trail file is crash open after fixup).
An audit dump process detected an internal error.
The ZEMS-TKN-EMPHASIS token is set to TRUE.
9057 Internal error (Audit trail file changed during the dump).
An audit dump process detected an internal error.
The ZEMS-TKN-EMPHASIS token is set to TRUE.
9100 File is marked REDO needed.
An attempt was made to make an online dump of an audited database file that
needs to be recovered by the TMF file recovery process.
The ZEMS-TKN-EMPHASIS token is set to TRUE.
HP NonStop TMF Management Programming Manual—540140-008
Dump/Restore Errors and Warnings
7-73