HP NonStop TMF Programming Manual page 778

Error and Warning Messages
511 ZTMF-ERR-BTENABLED
BEGINTRANSACTION is not currently disabled via a previous DISABLE
BEGINTRANS command.
No error list is included in the response.
512 ZTMF-ERR-BADTRANSCOUNTTHRESH
The low value of the TRANSCOUNTTHRESHOLD token is less than 1, or the
high value of the token is less than the low value.
No error list is included in the response.
513 ZTMF-ERR-BADTMFLIBMEMTHRESH
The low value of the TMFLIBMEMTHRESHOLD token is less than 1, or the
high value of the token is less than the low value or greater than 99.
No error list is included in the response.
514 ZTMF-ERR-BADTMPMEMTHRESH
The low value of the TMPMEMTHRESHOLD token is less than 1, or the high
value of the token is less than the low value or greater than 99.
No error list is included in the response.
515 ZTMF-ERR-BADTRANSPERCPU
Either value of the TRANSPERCPU token is less than 1 or greater than
1,073,741,824.
No error list is included in the response.
516 ZTMF-ERR-BADAUTOABORT
The value of the ZAUTOABORT token is less than zero or greater than
21,474,836.
No error list is included in the response.
521 ZTMF-ERR-CTLGCANTDELETE
This error is returned if a DELETE CATALOG command fails because
of a writeread or read problem.
An error list is included in the response with ZTMF-TKN-FS-ERROR
specifying the file-system error that occurred.
HP NonStop TMF Management Programming Manual—540140-008
7-50
Errors