HP NonStop TMF Programming Manual page 736

Error and Warning Messages
67 ZTMF-ERR-ADDMEDIAINCONSISTENT
The combination of attributes specified for the ADD TAPEMEDIA command is
inconsistent. The LABEL attribute must always be present. If LABEL OFF is
specified, the STATUS attribute must be present. If LABEL ON is specified, the
DRIVE attribute must be present.
69 ZTMF-ERR-INVALIDRESOLVESTATE
The specified STATE value is invalid or not present. ABORTED or ENDED are
valid values.
70 ZTMF-ERR-AUDITDUMPONEFILEONLY
You must specify exactly one filename when you are adding an audit dump into
the TMF catalog.
72 ZTMF-ERR-TOOMANYTAPEMEDIA
You specified more than 16 tape volume parameters.
73 ZTMF-ERR-INVALIDDUMPSERIAL
The specified dump serial number is invalid. The value must be greater than 63.
The ZTMF-TKN-DUMPSERIAL token supplied within the error list provides
additional information.
74 ZTMF-ERR-TOOMANYDISKMEDIA
The DISKMEDIA attribute received too many entries. A maximum of 10
entries is allowed for the DISKMEDIA attribute (for the DUMP FILES
command). A maximum of 4 entries is allowed for the DISKMEDIA attribute
(for the ADD AUDITDUMP or ALTER AUDITDUMP commands).
75 ZTMF-ERR-DISKMEDIANOTALLOWED
The DISKMEDIA attribute is only allowed with the MEDIUM DISK attribute.
76 ZTMF-ERR-ILLEGALDISKOPTION
One of the attributes specified is not allowed with the MEDIUM DISK attribute.
77 ZTMF-ERR-INVALIDDISKMEDIA
The specified DISKMEDIA name is invalid.
The ZTMF-TKN-DISKMEDIA token supplied within the error list provides
additional information.
HP NonStop TMF Management Programming Manual—540140-008
7-8
Errors