HP NonStop TMF Programming Manual page 400

Event Messages
146: ZTMF-EVT-BackupNotCapable
An operator or subsystem control program (SPI requester) issued a Start TMF
command, but TMF would not start because the primary TMF management process
(TMP) failed and the backup TMP was not yet able to take over.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
ZEMS-TKN-Emphasis
Event-Message Text
Backup TMP was not fully reloaded and is not capable
of taking over. Executing a STOP TMF, Abrupt.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
is the subject token of the event message, and it identifies the TMF process that
generated the event. The value of this token for this event is ZTMF-VAL-
PROC-TMP.
ZEMS-TKN-Emphasis
is set to True for this event.
Effect
TMF is down.
Recommended Action
Issue another Start TMF command. If the error condition persists, contact your service
provider and provide all relevant information as follows:

Descriptions of the problem and accompanying symptoms

Details from the message(s) generated

Supporting documentation such as Event Management Service (EMS) logs, trace
files, and a CPU dump, if applicable
If your local operating procedures require contacting the Global Customer Support
Center (GCSC), supply your system number and the numbers and versions of all
related products as well.
HP NonStop TMF Management Programming Manual—540140-008
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-Boolean.
6-128
Descriptions of Event Messages