HP NonStop TMF Programming Manual page 183

Commands and Responses
Tokens in Response Buffer
ZTMF-MAP-Info-Dumps
is an extensible structured token containing the attributes of the selected dumps.
This token contains the following fields:
ZName
specifies the file name of the online dump or audit dump that met the selection
criteria in the command buffer.
ZSerial
specifies the serial number of the dump.
ZDumpType
specifies the type of dump (online or audit).
ZMasterSequence
specifies the master-audit-trail sequence number that was current when the
online dump of this file began. This field is Null unless the value of the
ZDumpType is ZTMF-VAL-OnlineDump.
ZDataSequence
specifies the auxiliary-audit-trail sequence number that was current when the
online dump of this file began. If only a master audit trail is configured, the
master-audit-trail sequence number is the same as the auxiliary-audit-trail
sequence number. This field is null unless the value of the ZDumpType is
ZTMF-VAL-OnlineDump.
ZDumpStatus
specifies the status of the dump file (assigned, released, or invalid).
ZMediaStatus
specifies the status (assigned, released, or bad) of the tape volume specified in
the ZMedia field.
ZSortSelect
is not valid for response buffers.
ZTimeStamp
specifies the time (GMT) the dump was made.
HP NonStop TMF Management Programming Manual—540140-008
5-119
INFO DUMPS