HP NonStop TMF Programming Manual page 170

Commands and Responses
Tokens in Response Buffer
ZTMF-MAP-Info-BeginTrans
is an extensible structured token containing the attributes of the BeginTrans object.
This token contains the following fields:
ZTransCountThresh
specifies the upper and lower limits at which the number of active transactions
in the system automatically disables or reenables new transactions.
The first number is the lower limit, below which new transactions are
reenabled. The second number is the upper limit, above which new
transactions are disabled.
ZTmfLibMemThresh
specifies the upper and lower limits at which the percentage of CPU memory
allocated to the TMP automatically disables or reenables new transactions.
The first number is the lower limit, below which new transactions are
reenabled. The second number is the upper limit, above which new
transactions are disabled.
ZTmpMemThresh
specifies the upper and lower limits at which the percentage of CPU memory
allocated to the TMP's extended segment cause TMF to automatically disable
and re-enable new transactions.
The first number is the lower limit, below which new transactions are
reenabled. The second number is the upper limit, above which new
transactions are disabled.
ZTransPerCpuCurrent
specifies the number of transactions running currently in TMP and non-TMP
CPUs.
ZTransPerCpuConfig
specifies the configured maximum number of transactions that can run in TMP
and non-TMP CPUs.
ZAutoAbort
specifies the number of seconds a transaction can remain active before it is
aborted automatically. If this value is 0, transactions survive indefinitely.
HP NonStop TMF Management Programming Manual—540140-008
5-106
INFO BEGINTRANS