HP NonStop TMF Programming Manual page 319

Event Messages
91: ZTMF-EVT-CantUndoAddAT
An operator or subsystem control program (SPI requester) issued an ADD
AUDITTRAIL command, but the command failed and some of its effects could not be
undone.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
ZTMF-TKN-AuditTrailID
ZEMS-TKN-Emphasis
Event-Message Text
Cannot UNDO the effects of a failed ADD AUDITTRAIL for the
ZTMF-TKN-AuditTrailID Audit Trail.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
identifies the TMF process that generated the event. For this event, the value of
this token is ZTMF-VAL-PROC-TMP.
ZTMF-TKN-AuditTrailID
is the subject token of the event message, and it specifies which audit trail the
message applies to. The values are:
ZTMF-VAL-Mat
ZTMF-VAL-Aux01
ZTMF-VAL-Aux02
. . .
ZTMF-VAL-Aux15
ZEMS-TKN-Emphasis
is set to True for this event.
Effect
The previous audit trail configuration might be corrupted, further audit trail configuration
might not be possible, and you might not be able to start TMF.
HP NonStop TMF Management Programming Manual—540140-008
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-Boolean.
Master audit trail
Auxiliary audit trail #1
Auxiliary audit trail #2
Auxiliary audit trail #15
6-47
Descriptions of Event Messages