HP NonStop TMF Programming Manual page 186

Commands and Responses
Tokens in Command Buffer
ZTMF-TKN-Media
specifies the name of a tape volume for which the configured values are to be
returned. To specify all media, set name to "*
four spaces), partnumber to -1, and copynumber to -1.
ZTMF-MAP-Info-Media
is an extensible structured token specifying the attributes that are to be used in
selecting the tape volumes about which information is to be returned. This token is
required; only one occurrence is allowed. If multiple attributes are specified,
information is returned only for volumes that meet all the selection criteria. This
token contains the following fields:
ZMediaName
is not valid in command buffers.
ZMedium
specifies the type of storage media. The value of this field should be ZTMF-
VAL-MediumTape for a tape volume.
ZMediaStatus
specifies the selection of tape volumes that have the particular status. The
following values are valid:
ZTMF-VAL-Assigned
ZTMF-VAL-Released
ZTMF-VAL-Scratch
ZTMF-VAL-Bad
HP NonStop TMF Management Programming Manual—540140-008
" (that is, an asterisk followed by
The tape volume contains valid dumps
The content of the tape volume is not required
for file recovery
The tape volume can be used for dumping
files
The tape volume is defective and cannot be
used
5-122
INFO MEDIA