HP NonStop TMF Programming Manual page 770

Error and Warning Messages
425 ZTMF-ERR-OPERATIONDOESNOTEXIST
A CANCEL OPERATIONS command was issued for an operation that does not
exist.
No error list is returned in the response.
426 ZTMF-ERR-ALREADYCANCELLINGOPER
A CANCEL OPERATIONS command was issued for an operation that is in the
process of being cancelled.
No error list is returned in the response.
427 ZTMF-ERR-TOOLATETOCANCELOPER
A CANCEL OPERATIONS command was issued for an operation that has been
completed.
No error list is returned in the response.
440 ZTMF-ERR-OPERATIONBEGUN
The requested operation has begun.
The ZTMF-TKN-OPERATIONNUM token supplied within the error list
provides additional information.
441 ZTMF-ERR-INVPROCESSTYPE
The command specified an invalid process-type parameter.
No error list is returned in the response.
442 ZTMF-ERR-INVMAKESAVEABEND
An ALTER PROCESS command specified the MAKESAVEABEND option
with an illegal value.
No error list is returned in the response.
443 ZTMF-ERR-INVDEBUG
An ALTER PROCESS command specified the DEBUG option with an illegal
value.
No error list is returned in the response.
444 ZTMF-ERR-INVINSPECT
An ALTER PROCESS command specified the INSPECT option with an illegal
value.
No error list is returned in the response.
HP NonStop TMF Management Programming Manual—540140-008
7-42
Errors