HP NonStop TMF Programming Manual page 329

Event Messages
96: ZTMF-EVT-ATAdded
An operator or subsystem control program (SPI requester) issued an ADD
AUDITTRAIL command, defining the specified audit trail as indicated in the message.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
ZTMF-TKN-AuditTrailID
ZTMF-TKN-ATFilesPerVol
ZTMF-TKN-ATFileSize
ZTMF-TKN-ATOvThresh
ZTMF-TKN-ATBTDisable
ZTMF-TKN-AuditDump
ZEMS-TKN-Emphasis
Event-Message Text
ZTMF-TKN-AuditTrailID Audit Trail added with FilesPerVol
ZTMF-TKN-ATFilesPerVol, FileSize ZTMF-TKN-ATFileSize,
OverflowThreshold ZTMF-TKN-ATOvThresh, BeginTransDisable
ZTMF-TKN-ATBTDisable, AuditDump ZTMF-TKN-AuditDump.
Additional Unconditional Tokens
ZTMF-TKN-EVTHDR-ProcessType
identifies the TMF process that generated the event. For this event, the value of
this token is ZTMF-VAL-PROC-TMP.
ZTMF-TKN-AuditTrailID
is the subject token of the event message, and it specifies which audit trail the
message applies to. The values are:
ZTMF-VAL-Mat
ZTMF-VAL-Aux01
ZTMF-VAL-Aux02
. . .
ZTMF-VAL-Aux15
ZTMF-TKN-ATFilesPerVol
is the configured FILESPERVolume attribute value.
ZTMF-TKN-ATFileSize
is the configured FILESIZE attribute value.
HP NonStop TMF Management Programming Manual—540140-008
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-Enum.
token-type ZSPI-TYP-Int.
token-type ZSPI-TYP-Int2.
token-type ZSPI-TYP-Int.
token-type ZSPI-TYP-Int.
token-type ZSPI-TYP-Boolean.
token-type ZSPI-TYP-Boolean.
Master audit trail
Auxiliary audit trail #1
Auxiliary audit trail #2
Auxiliary audit trail #15
6-57
Descriptions of Event Messages