HP NonStop TMF Programming Manual page 732

Error and Warning Messages
09 ZTMF-ERR-ONETRANSIDREQUIRED
Exactly one transaction identifier is required (within this context).
10 ZTMF-ERR-INVALIDTRANSID
An invalid transaction identifier was specified.
The ZTMF-TKN-TRANSID token supplied within the error list provides
additional information.
11 ZTMF-ERR-WILDCARDTRANSID
A transaction identifier cannot contain any wildcard (*) syntax (within this
context).
The ZTMF-TKN-TRANSID token supplied within the error list provides
additional information.
12 ZTMF-ERR-INVALIDTRANSSTATE
The specified STATE value is invalid. ACTIVE, ENDING, or ABORTING must
be specified.
13 ZTMF-ERR-OUTPUTONLYFIELDUSED
An output-only field in the structure for this command was not NULL during
input.
14 ZTMF-ERR-INVALIDPROCESSNAME
An invalid process name was specified.
The ZTMF-TKN-PROCESS token supplied within the error list provides
additional information.
15 ZTMF-ERR-PROCESSNAMEREMOTE
A remote process name cannot be specified (within this context).
The ZTMF-TKN-PROCESS token supplied within the error list provides
additional information.
16 ZTMF-ERR-EXACTLYONESTRUCT
The command buffer did not contain a required MAP structure, or it contained
more than one of them. The command must contain exactly one such structure.
HP NonStop TMF Management Programming Manual—540140-008
7-4
Errors