HP NonStop TMF Programming Manual page 427

Event Messages
ZTMF-TKN-RCOV-Op-of-Error
specifies the operation that was being attempted. The values are:
ZTMF-VAL-RCOV-LOGICALREDO
ZTMF-VAL-RCOV-PHYSICALREDO
ZTMF-VAL-RCOV-LOGICALUNDO
ZTMF-VAL-RCOV-PHYSICALUNDO
ZTMF-VAL-RCOV-FLABMODREDO
ZTMF-VAL-RCOV-FLABMODUNDO
ZTMF-VAL-RCOV-CHANGEFLAB
ZTMF-VAL-RCOV-OPEN
ZTMF-VAL-RCOV-FLUSHFILES
ZTMF-VAL-RCOV-FLUSHAUDIT
ZTMF-VAL-RCOV-CLEARFLAGS
ZTMF-VAL-RCOV-READ
ZTMF-VAL-RCOV-POSITION
ZTMF-TKN-RCOV-Error-Index
contains an integer specifying an audit-trail index value (zero indicates the master
audit trail; one through 15 indicate auxiliary audit trails).
ZTMF-TKN-RCOV-Error-Sno
contains an integer specifying an audit-trail file sequence number.
ZTMF-TKN-RCOV-Error-Rba
contains an integer specifying a relative byte address (rba) within the audit-trail file.
If the rba is less than 2,147,483,647, this token contains the actual rba. If the rba is
2,147,483,647 or greater, this token contains 2,147,483,647 (and the RBA2 token
contains the actual rba).
ZTMF-TKN-RCOV-Error-Rba2
contains an integer specifying a relative byte address (rba) within the audit-trail file.
This token always contains the actual rba.
ZEMS-TKN-Emphasis
is set to False for this event.
HP NonStop TMF Management Programming Manual—540140-008
6-155
Descriptions of Event Messages