DEFAULT GATEWAY
FUNCTION
Specifies default gateway.
FORMAT
<ESC>W3
Place this command between <ESC>A start code and <ESC>Z stop code..
EXAMPLE
<ESC>A
<ESC>W3128220001001
<ESC>Z
OUTPUT
This command does not result in printer output.
Setting can be printed on the factory test print.
NOTES
You cannot use this command in combination with other commands.
The set parameter will become valid after rebooting.
Default setting of Default gateway is as follows:
Default gateway: 000000000000
E/Pro Programming Reference
Unit 4: Standard Command Codes
a~a
= Default gateway = 12 digits fixed
4-133
PN: 9001096E