Default Head Mode (Changing Head Density) - SATO S84 ex Service Manual

2 Operation and Configuration
2.1.3

Default Head Mode (Changing Head Density)

This mode allows user to change the head dot density after replacing with a new print head with different
head dot density.
The flowchart shows the sequence of the setting screens for the default head mode. The table describes
each setting screen in detail.
HEAD CHANGE
This screen shows when the printer is powered on after the print head has
been changed to a different dot density head.
Set whether or not to change the head dot density.
• YES: The printer initializes the printer setting/protocol code.
• NO: The printer does nothing. The
DEFAULT SETTING COMPLETED
This screen shows that the printer has completed the initialization of printer
setting/protocol code.
Power off the printer for the new head dot density to take effect.
16 S84-ex/S86-ex Service Manual
New print head
with different density +
Power on
Select YES + button
ENTER button has no response.
Waiting to be powered off.