Cut, Label - SATO CL408 Programming Reference Manual

CUT, LABEL

FUNCTION
Regulates label cutting when using a cutter assembly with the printer. This command allows
the cutting of a multi-part tag or label at a specified interval within a print job. It differs from
the <ESC>~ Cut Job command in that it does not interact with the quantity command.
FORMAT ESC>~Aaaaa
Place preceding the <ESC>Q Print Quantity command.
EXAMPLE This set of commands will print seven labels with two labels between each cut. One label will
be cut separately.
OUTPUT
(4-57)
NOTES
The optional cutter assembly must be installed and enabled to use this function.
If the cutter option has been enabled in the printer configuration and the cut value is (a = 0), the cutter
is inactive.
This command is independent of the <ESC>Q Quantity command. It will cut the specified number of
labels.
E/Pro Programming Reference
Unit 4: Standard Command Codes
aaaa = Number of labels to print between each cut (1 to 9999)
4-89
PN: 9001096E