SATO CL408 Programming Reference Manual page 101

BAR CODES
NOTES
Human readable data will be printed only when a valid Thin Bar Width is selected within the barcode
command and it complies to the following table:
The Code 128, UCC 128, MSI, and Code 93 bar codes are not affected by the narrow to wide ratios.
The Codabar, Code 39, Industrial 2 of 5, and Matrix 2 of 5 bar codes are affected by the Character
Pitch command. This command must be placed before the Bar Code command.
Because of their unique characteristics, two-dimensional (2D) symbols are covered separately.
For UCC128, the FNC1 code is automatically inserted and the Mod 10 and Mod 103 check digits are
automatically calculated. For the MSI bar code, the check digit is not automatically calculated.
The <ESC>D and <ESC>BD commands are not valid for the MSI, Code 128, Code 93, UPC-E,
Bookland, UCC128 and Postnet symbologies.
A user can automatically print HRI without the d.
Refer to Appendix: Reference Tables 11, 12, and 13 for additional information.
E/Pro Programming Reference
Unit 4: Standard Command Codes
Printer
DPI Valid Thin Bar Value (bb)
203
305
609
4-49
02, 03
03, 04
06, 07, 08
PN: 9001096E