Cut Number Unit - SATO CL408 Programming Reference Manual

CUT NUMBER UNIT

FUNCTION
Cuts label at a specified interval in a print job.
FORMAT
<ESC>CTaaaa
EXAMPLE
<ESC>A
<ESC>V100<ESC>H200<ESC>P2<ESC>L0202<ESC>X22,ABC
<ESC>CT2
<ESC>Q7
<ESC>Z
OUTPUT
NOTES
1. Valid only for cutter-mounted models.
2. If the parameter is not specified by this command <ESC>CT, each label will be cut after being
printed.
3. In case the parameter "a" is set to 0, no label will be cut.
4. Set this command before <ESC>Q command.
5. This command can not be used in combination with other cut commands <ESC>~ or <ESC>~A.
E/Pro Programming Reference
Unit 4: Standard Command Codes
a =
Number of labels between each cut =
Qty range : 0 to 9999
(1) Normal (complete) cut mode
Complete
CT 2
cut
2 pcs
4-95
Left on printer
Complete
Complete
cut
cut
7 pcs
Q 7
Feed direction
Complete
cut
PN: 9001096E