Restore To Factory Default - SATO ARGOX iX4-280 Series User Manual

iX4-280/380 Series Printer
User Manual

Restore to Factory Default

3.4
Be cautioned that this will reset all printer settings back to defaults; if possible, print the
configuration label in advance before reset. All settings stored in FLASH memory are
retained even after turning off the printer. Printer mode without LCD can see indicators.
To reset the printer to factory default settings:
1. Turn off the printer.
2. Press and hold the CANCEL button and turn on the printer.
3. When "RESET ..." is displayed on the LCD and the READY indicator blinks,
release the CANCEL button.
4. When "READY" is displayed on the LCD, the READY indicator stops blinking
but remains illuminated.
5. The following information is now back to defaults:
• Label parameters
• Heat (Darkness)
• Speed
• Others for specific emulation
Note:
Print length meter which indicates label length already printed cannot be
reset.
44