SATO CL408 Programming Reference Manual page 148

INTERFACE
FUNCTION
Specifies the interface used to connect with the host computer.
FORMAT <ESC>DI
EXAMPLE
<ESC>A
<ESC>DI0
<ESC>Z
OUTPUT
NOTES
1. Set this command between start code <ESC>A and stop code <ESC>Z.
2. This command will be valid after rebooting.
3. Set <ESC>DI2 to use Keypad. Only in this case, connection with Keypad will be checked and
supplied with power. While powering to Keypad, connection check will be executed at fixed intervals
and the printer stops supplying power when disconnected. Connection check will not be done after
that.
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = Interface
0: USB
1: RS-232C / LAN / IEEE1284
2: Keypad
3: Scanner / Smart keyboard
4-96
PN: 9001096E