Print Triangles - SATO CL408 Programming Reference Manual

PRINT TRIANGLES

FUNCTION Specifies the printing of triangles.
FORMAT <ESC>FT,aaaa,bbbb(,cccc,d)
EXAMPLE
Side length: 100 dots. Line width: 8 dots. Base length: 100 dots.
<A>
<V>100<H>200<FT>,100,8,100,0
<Q>2
<Z>
OUTPUT
NOTES 1. When the pattern designation value is outside of the range specified, it will be processed as
"0."
2. When the print start position is outside of the printable area, printing will not be performed
due to command error.
3. When the base length is not equal to the length of sides, printing will not be performed due
to command error.
4. This command sets the base reference point to the apex of the triangel.
5. This command can be registered to the format.
6. If setting the line width, it will be widened to the inside triangle.
7. When setting an odd number to the base length, 1 will be added to the base length
automatically.
E/Pro Programming Reference
Unit 4: Standard Command Codes
a = 10 to 2000 dots (side length)
b = 1 to 1000 dots (line width)
c = 10 to 2000 (base length) (Omissible. If digits are left out, its value will be
equal to the length of sides.)
d = 0 to 3 (pattern) (Omissible. If digit is left out, the default is 0.)
0: Solid black line
1: Gray 1
2: Gray 2
3: Gray 3
4. This command sets the base reference point to the apex of the triangle.
0,0
<H>200
a
4-13
<V>100
a: Side length
a
b: Base length
b
PN: 9001096E