Print End Position - SATO CL408 Programming Reference Manual

PRINT END POSITION

FUNCTION
Changes the label stop position in the sensor disabled mode.
FORMAT <ESC>EP
Place after <ESC>A within the data stream.
EXAMPLE
<ESC>A
<ESC>EP
<ESC>Z
OUTPUT
This command does not result in printer output.
NOTES
Specify as a set with Label Size command <ESC>A1 and only valid when sensor is disabled.
(4-54)
E/Pro Programming Reference
Unit 4: Standard Command Codes
4-86
PN: 9001096E