Esc>Q Print Quantity; Cut, Label - SATO /gt Series Programmer's Reference Manual

Unit 4: Standard Command Codes

CUT, LABEL

FUNCTION Regulates label cutting when using a cutter assembly with the printer. This command
allows the cutting of a multi-part tag or label at a specified interval within a print job. It
differs from the <ESC>~ Cut Job command in that it does not interact with the
quantity command.
FORMAT ESC>~Aaaaa
Place preceding the <ESC>Q Print Quantity command.
EXAMPLE
This set of commands will print seven labels with two labels between each cut. One
label will be cut separately.
OUTPUT
(4-39)
NOTES
The optional cutter assembly must be installaed and enabled to use this function.
If the cutter option has been enabled in the printer configuration and the cut value is
(a = 0), the cutter is inactive.
This command is independent of the <ESC>Q Quantity command. It will cut the
specified number of labels.
SATO E+ Programming Reference
aaaa = Number of labels to print between each cut (1 to 9999)
PN 9001149A Page 4-53