SATO CG2 Series Operator's Manual page 92

Section 7: Interface Specifications
7.4 LOCAL AREA NETWORK (LAN) ETHERNET AND WIRELESS LAN (cont'd)
Other Wireless LAN settings
Item
Network
FTP
RAWTCPServer
LDP
*1 Acceptable HEX or ASCII code to input. Case-sensitive for ASCII code, on the other hand, HEX code is
not.
*2 Regarding Channel, the setting range varies depending on the destination of the printer.
*3 AironetExtension (Setting to send KEY continuously from AP) is not supported.
*4 Alphanumeric and symbols excluding [,] (comma) and ["] (double quotation).
[Certification]
Certificate is required for 802.1x authentication. There are two types of certificate such as Client Certificate
and Root Certificate, and each of them is downloadable from its own website only. Time-out at the time of
import is 10 seconds.
[Corresponding certification format]
• CA root certificate
• Client certificate
• Secret key
* When the client certificate file is in PKCS#12 format, leave [secret key file name] blank.
Page 7-16
IP Setup Method 0
Rarp 0
Local IP address 192 168 001 001
Subnet Mask 255 255 255 000
Gateway Address 000 000 000 000
Ftp Disc Time-out 030
Raw Disc Time- 0300
out
Lpd Disc Time-out 030
: X.509(cer, DER, PEM)
: PKCS#12(pfx, p12), X.509(cer, DER, PEM)
: Key
Default
0: DHCP/BOOTP disabled
1:DHCP/BOOTP enabled
0: RARP disabled
1: RARP enabled
000 000 000 000 ~ 255 255 255 255
000 000 000 000 ~ 255 255 255 255
000 000 000 000 ~ 255 255 255 255
30 ~ 500 (sec)
0 ~ 3600 (sec)
30 ~ 500 (sec)
Setting range
CG2 Series Operator Manual