Rs232C Serial Interface - SATO CG2 Series Operator's Manual

Section 7: Interface Specifications

7.2 RS232C SERIAL INTERFACE

7.2.1 Basic Specifications of RS-232C Serial Interface
This interface complies with the RS-232C standard. It is available with Type 1 board.
Interface connector
Communication
settings
Page 7-2
DB-9S or equivalent (Male)
Cable length: 5m or less
Use Printer configuration tool or <I2> command to setup.
<I2>abcde
Parameter Item
a Baud rate
b Data bit length
c Parity bits
d Stop bits
e Protocol
Value Description
4 115200bps
3 57600bps
2 38400bps
1 19200bps [Default]
0 9600bps
1 7 bits
0 8 bits [Default]
2 EVEN
1 ODD
0 NONE [Default]
1 2 bits
0 1 bit [Default]
4 STATUS 3
3 Protocol for driver (STATUS 4)
[Default]
2 XON/XOFF
1 READY/BUSY (Multi reception)
0 READY/BUSY (Single item
reception)
CG2 Series Operator Manual