SATO CG2 Series Operator's Manual page 87

Communication
configuration
Wi-Fi
CG2 Series Operator Manual
The following settings can be configured via Printer configuration tool or com-
mands.
Item Command
LAN mode
Wireless LAN
2-port connection by Port1024 and Port1025 or 1 port connection by
1
*
Port9100.
2
1 port connection by Port1024 or Port9100.
*
3
Refer to Command specifications for more information.
*
1) Standard
IEEE802.11b/g
2) Frequency
2.4GHz
3) Transfer rate
Max. 11Mbps (IEEE802.11b)
Max. 54Mbps (IEEE802.11g)
4) W-LAN communication mode
Infrastructure mode
Ad hoc mode
5) Channel
1 to 11 ch
6) SSID
Alphanumeric up to 32 characters
(except for ',' (comma) and '"' (double quotation)
7) Authentication method
None
IEEE802.11 (authenticaion with access points)
WEP (Open System / Shared Key)
IEEE802.11 (authentication between W-LAN devices)
WPA (PSK (Pre-Shared Key) or IEEE 802.1x authentication)
WPA2 (PSK (Pre-Shared Key) or IEEE 802.1x authentication)
IEEE 802.1x (EAP-LEAP, EAP-TLS, EAP-PEAP, or EAP-TTLS)
(Hereafter called "EAP")
8) Encryption method
None
WEP key
TKIP
AES
Section 7: Interface Specifications
<I3> Protocol for driver (STATUS4) cyclic
response mode *
Protocol for driver (STATUS4) ENQ
response mode *
2
STATUS3 *
<WZ>
Wireless LAN setup *
Setting range
1
1
3
Page 7-11