15Mm (0.6") Wide Wristband - SATO CG2 Series Operator's Manual

8.4 15MM (0.6") WIDE WRISTBAND

To distinguish the fastening hole of wristband (1) and tag hole (2), the length of tag hole (2) is designed to be
6mm (0.23").
The top of tag hole (2) becomes the print reference position.
When using this type of wristband, please set the Sensor Type to Transmissive sensor 2 (for Wrist band, no
die cutting).
The usage of this wristband is similar to the one with I-Mark (Die cutting).
4-R 0.5~1
Perforation
CG2 Series Operator Manual
Print
area
Tag hole
4mm
[0.16"]
Wristband 15mm [0.6"]
7.5mm [0.3"]
Section 8: Appendix
Page 8-7