SATO CG2 Series Operator's Manual page 88

Section 7: Interface Specifications
7.4 LOCAL AREA NETWORK (LAN) ETHERNET AND WIRELESS LAN (cont'd)
Maximum receive
buffer capacity
7.4.3 Software Specifications
Protocol
Network layer
Session layer
Application layer
Notes
• Send the print data by LPR and FTP of TCP/IP and dedicated socket protocol.
• Use socket connection to get the printer status.
Page 7-12
9) Security (Combination of authentication and encryption)
Ad hoc mode
Security
None
WEP
Infrastructure mode
Security
None
WEP
WPA
WPA2
Dynamic WEP
[Notes]
Consult your system administrator about the interference from radio waves when
using the printer near medical equipment and facilities.
1MB
0MB
Near full occurred
Near full released
TCP/IP
ARP, RARP, IP, ICMP
TCP, UDP
LPR, FTP, TELNET, BOOTP, DHCP, HTTP
IEEE 802.11 IEEE 802.11i
None None
Open System None
Shared Key
IEEE 802.11 IEEE 802.11i
None None
Open System None
Shared Key None
None PSK
EAP
None PSK
EAP
None EAP
Encryption
None
WEP key
Encryption
None
WEP key
TKIP
AES
WEP key
1MB
Remaining 0.25MB
Remaining 0.5MB
CG2 Series Operator Manual