Hitachi L700 SERIES Instruction Manual page 36

Chapter 2 Installation and Wiring
Ground terminal with
jumper (shaded in the
figure) to enable/disable the
EMC filter function
[Method of enabling/disabling the EMC filter function]
Enabling the EMC filter
Jumper connecting
Terminals PD and P
When not using the DCL,
do not remove the jumper
from terminals PD and P.
[Method of enabling/disabling the EMC filter function]
Enabling the EMC filter
Terminal layout
Charge lamp
Jumper connecting
terminals PD and P
When not using the DCL,
do not remove the jumper
from terminals PD and P.
Disabling the EMC filter
(factory setting)
Ground terminal with
jumper (shaded in the
figure) to enable/disable the
EMC filter function
Disabling the EMC filter
(factory setting )
2 - 14
Inverter model
L700-370LFF
R0 and T0: M4
Ground terminal: M6
Other terminals: M8
L700-370HFF
R0 and T0: M4
Ground terminal: M6
Other terminals: M6
L700-450LFF
L700-450HFF
R0 and T0: M4
Ground terminal: M8
Other terminals: M8
L700-550LFF
L700-550HFF
L700-750HFF
R0 and T0: M4
Ground terminal: M8
Other terminals: M8