Extreme Networks BlackDiamond X8 Series Hardware Installation Manual page 78

•
#2 Phillips screwdriver
•
Module blank panel if you are not replacing the module
Slots for I/O modules are numbered 1 through 8, starting at the top.
Note
All unoccupied I/O module slots must be covered by I/O module blanks to ensure proper
system ventilation and EMI compliance. Individual I/O module blanks are purchased
separately from the chassis. See
1 Remove the shipping cover from the I/O module slots.
The shipping cover maintains the mechanical stability of the chassis during shipping.
2 Keep the shipping cover and store it with the other chassis shipping materials, in case you need to
move the chassis or return it to Extreme Networks.
3 Attach the ESD-preventive wrist strap to your bare wrist.
4 If it is not already connected, connect the metal end to the receptacle between the management
module slots.
5 Holding the module by the metal rail and front panel only, remove the module from the antistatic
packaging.
Caution
To prevent ESD damage, never touch the components on the PCB or the pins on any of
the connectors.
BlackDiamond X8 Series Switches Hardware Installation Manual
BlackDiamond X8 Maintenance Procedures
Install I/O Module Blanks to install I/O blanks.
78