Extreme Networks BlackDiamond X8 Series Hardware Installation Manual page 18

Figure 6: BDXA-40G12X I/O Module
1 = QSFP+ ports
In the default configuration for the BDXA-40G12X module, all ports:
•
Are added to the default VLAN as untagged.
•
Inherit the properties of the default VLAN (for example, protocol type and VLAN ID).
The BDXA-40G12X module has the following LEDs:
•
Module status (STAT)
•
Module diagnostics (DIAG)
•
Port status
When a port is operating in 40-Gbps mode, the farthest left LED below that port lights blue to indicate
the 40-Gbps operation. When a port is operating in 10-Gbps mode, each LED for an active channel
from the port lights green.
For information about the LEDs and their activity on the BDXA-40G12X modules, see
BDXA-10G48T I/O Module
The BDXA-10G48T I/O module has 48 copper 10-gigabit Ethernet ports.
2
Figure 7: BDXA-10G48T I/O Module
1 = 10-gigabit Ethernet ports
In the default configuration for the BDXA-10G48T module, all ports:
•
Are added to the default VLAN as untagged.
•
Inherit the properties of the default VLAN (for example, protocol type and VLAN ID).
The BDXA-10G48T module has the following LEDs:
•
Module status (STAT)
•
Module diagnostics (DIAG)
BlackDiamond X8 Series Switches Hardware Installation Manual
BlackDiamond X8 Series Modules and Fans
2 = LEDs
1
2 = LEDs
I/O Module LEDs.
18