Extreme Networks BlackDiamond X8 Series Hardware Installation Manual page 55

7 Use the lever to fully seat the module internal connectors.
Figure 34: Seating the Management Module
8 Use a # 2 Phillips screwdriver to lock the handle into place.
When the locking screw is fully tightened, the yellow band around the screw head is completely
hidden.
Caution
Be careful to avoid over-torquing and stripping the screw head.
Figure 35: Locking the Module into Place
BlackDiamond X8 Series Switches Hardware Installation Manual
Installing BlackDiamond X8 Series Modules
55