Applicable Industry Standards - Extreme Networks BlackDiamond X8 Series Hardware Installation Manual

UPS Transition Time
Transition time is the time that is necessary for the UPS to transfer from utility power to full-load
battery power. For Extreme Networks products, a transition time of less than 20 milliseconds is
required for optimum performance.

Applicable Industry Standards

Always follow applicable industry standards.
For more infor mation, see the following ANSI/TIA/EIA standards:
•
ANSI/TIA/EIA-568-A: Discusses the six subsystems of a structured cabling system.
•
ANSI/TIA/EIA-569-A: Discusses design considerations.
•
ANSI/TIA/EIA-606: Discusses cabling system administration.
•
ANSI/TIA/EIA-607: Discusses commercial building grounding and bonding requirements.
You can access these standards at www.ansi.orgor
BlackDiamond X8 Series Switches Hardware Installation Manual
www.tiaonline.org
Site Preparation
36