Extreme Networks BlackDiamond X8 Series Hardware Installation Manual page 46

c Lift the cover panel away from the chassis.
Figure 24: Removing the Power Supply Ventilation Cover
2 Identify the power supply bay where you will install the power supply.
Power supply bays are numbered from 1A to 8B. To establish an N+N redundant power
configuration, install power supplies in both the upper and lower rows.
Figure 25: Power Supply Bay Numbering on the Chassis
3 On the front of the power supply, push the release button to unlatch the insertion/ejector lever.
BlackDiamond X8 Series Switches Hardware Installation Manual
Installing a BlackDiamond X8 Series Chassis
46