Management Module - Extreme Networks BlackDiamond X8 Series Hardware Installation Manual

Table 3: Modules Available for the BlackDiamond X8 Series Switch (continued)
Module Type
I/O module

Management Module

The switch has two dedicated management module slots, labeled A and B, for the BDX-MM1
management module. One management module is required for switch operation; however, adding a
second management module increases system availability through redundancy. Each management
module contains a temperature sensor, nonvolatile random-access memory (NVRAM), and a real-time
clock.
The Management Module has very high speed and scalable control plane support with an Intel i7 dual
core CPU which will run at 2 GHz, 1 GB compact flash and 2 GB ECC DDR3 SDRAM.
BlackDiamond X8 Series Switches Hardware Installation Manual
Short Description Long Description
BDXA-10G48X 48-Port 10GBASE-X SFP+
module for BlackDiamond
X series chassis. Up to
eight modules in the BDX8
chassis support up to 384
wirespeed 10GbE ports
and work with either 2.56
or 5.12Tbps Fabric
Modules.
BDXA-40G24X 24-Port 40GBASE-X QSFP
+ module for
BlackDiamond X series
chassis. Up to eight
modules in the BDX8
chassis support up to 192
wirespeed 40GbE or 768
wirespeed 10GbE ports
and only work with
5.12Tbps Fabric Module.
BDXA-40G12X 12-Port 40GBASE-X QSFP+
module for BlackDiamond
X series chassis. Up to
eight modules in the BDX8
chassis support up to 96
wirespeed 40GbE or 384
wirespeed 10GbE ports
and work with either 2.56
or 5.12Tbps Fabric
Modules.
BDXA-10G48T 48-Port 10GBASE-T RJ45
module for BlackDiamond
X series chassis. Up to
eight modules in the BDX8
chassis support up to 384
wirespeed 10GbE copper
ports and work with either
2.56 or 5.12Tbps Fabric
Modules.
BlackDiamond X8 Series Modules and Fans
Manufacturing No. (SKU)
900851-10
900855-10
900856-10
908016-10
12