Yamaha RX-V571 Owner's Manual page 79

SET
RECEIVER
HDMI1-5
V-AUX
AV1-6
AUDIO
DOCK
TUNER
USB
iNPUT
MUTE
TVVOL
TV CH
TV_
keys
Operating the TV with the remote control
When the remote control codes for the TV are registered, the TV can
be operated at any time using the TV control keys, regardless of the
selected input source.
TV operation
keys
INPUT Switches video inputs to the TV.
MUTE Mutes TV volume temporarily.
TV VOL Controls the volume of the TV.
TV CH Switches TV channels.
TV (__ Turns the TV on and off.
• When a TV remote control code is registered to an input selection key, the TV can
be operated using the TV operation keys only when the input source with the TV
code registered is selected.
Registering remote control codes for
external device operations
Register remote control codes for external devices (such as a BD/
DVD player) to control them with the unit's remote control. Because
the remote control codes are registered to each input selection key,
when you select an input source the remote control instantly
switches to control that input source.
• The CD player (Yamaha: 5095) to AV3 as factory default settings. No remote
control keys are assigned to other input selection keys.
2
Use "Remote Control Code Search" in the CD-ROM
to search the available remote control codes for the
category, manufacturer, or external device.
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVERblinks twice.
Perform each of the following steps within 1 minute. Settings
will be automatically stopped if more than 1 minute passes
after the last operation. Toreset, repeat from step 2.
Press an input selection key.
(Example) When the remote control codes for the BD/DVD
player connected to HDMI1 jack are assigned, press HDMI1.
Enter a remote control code (4-digit) using the
numeric keys.
Once the remote control code is registered successfully
SOURCE/RECEIVER will blink twice.
If the registration fails, SOURCE/RECEIVER blinks six times. If
the registration fails, repeat from step 2.
• For details on how to register the input selection key applied the remote
control code on a corresponding SCENE key, refer to "Changing the settings
for the SCENE function" (p.35).
En
79