Yamaha RX-V571 Owner's Manual page 59

ENTER
RETURN
Depending on the input source, configure settings for the function
related to playback. An operation for settings is possible with only
the front display without using a TV monitor. Therefore, settings can
be changed easily as needed.
• To operate the "Option" menu on the TV monitor, connect the unit and a TV with an
HDMI cable, and change the input source on the TV to the video input from HDMI
OUT jack of the unit before operation.
Press OPTION.
Front display
TV monitor
Press the cursor keys (A/v) to select the desired
setting, and then press ENTER.
• Press RETURN to return to the previous screen.
3 Press the cursor keys (<lIE>) to adjust the setting.
4 Press OPTION to finish the setting.
Available settings in Option menu
• Only the available settings that can be applied to the selected input are displayed.
Tone Control Adjusts the high-frequency range and low- 60
frequency range of sounds.
Sets whether dynamic range (from maximum
Adaptive DRC to minimum) is adjusted automatically in 60
conjunction with adjusting the volume level.
Enhancer Enables/disables Compressed Music 60
Enhancer.
Volume Trim Adjusts the differences of the volume levels 60
when switching the input source.
Selects the 5.1 to 7.1-channel signal playback
Extended Surround method when surround back speakers are 61
used.
Displays information on the current video and
Signal Info 61
audio signal.
Audio In Combines video from the selected input 25
source with audio input from other jacks.
Combines audio of the TUNER or USB input
Video Out 45, 58
with video from other input.
Auto Preset Registers FM stations with strong signals 42
automatically in the preset numbers (up to 40).
Clear Preset Deletes the registered stations. 43
(U.K. and Europe models only) Automatically
Traffic Program searches for traffic information with the Radio 44
Data System.
Repeat Sets repeat playback of an iPod or USB 51, 57
device.
Shuffle Sets shuffle playback of an iPod. 51
Standby Charge Sets whether or not to charge an iPod while 62
the unit is in standby mode.
Sets whether operations for the iPod
iPod Interlock connected to the iPod wireless audio receiver 62
are in conjunction with operations for the unit.
Pairs Bluetooth devices with the Bluetooth
Pairing wireless audio receiver. 53
Connects or disconnects a wireless
Connect/
connection between Bluetooth devices with 54
Disconnect
the Bluetooth wireless audio receiver.
En
59