Yamaha RX-V571 Owner's Manual page 65

Configuring the speaker settings (Speaker)
Adjust parameters for speakers manually.
Configuration
Adjusts the output characteristics of the speakers based on manually set parameters.
• When specifying the speaker size, set the speaker size to "Large" for each speaker with a 16 cm or larger
woofer diameter, or to "Small" for a 16 cm or smaller woofer diameter.
Front
Selects the size (sound reproduction capacity) of the front speakers.
Settings
Large Select this when large front speakers are connected.
Select this when small front speakers are connected. The subwoofer will
Small (Default)
produce front channel low-frequency components.
Surround
Selects the size of the surround speakers and whether or not to use the speakers.
Settings
Large Select this when large surround speakers are connected.
Select this when small surround speakers are connected. The
Small (Default) subwoofer (or front speakers) will produce surround channel low-
frequency components.
Select this when no surround speakers are connected. The front
None speakers will produce surround channel audio signals. When set to
"None," the sound programs will change to Virtual CINEMA DSP mode.
Surround Back
Selects the size and number of the surround back speakers and whether or not to use
the speakers.
Settings
Large xl Select this when one large surround back speaker is connected.
Large x2 Select this when two large surround back speakers are connected.
Select this when one small surround back speakers is connected. The
Small xl subwoofer (or front speakers) will produce surround back channel low-
frequency components.
Select this when no surround back speakers are connected. The
Small x2 (Default) subwoofer (or front speakers) will produce surround back channel low-
frequency components.
Select this when no surround back speakers are connected. The
None surround speaker and subwoofer (or front speakers) will produce
surround back channel.
• When "Subwoofer" is set to "None," "Large" is automatically selected.
Center
Selects the size of the center speaker and whether or not to use the speaker.
Settings
Large Select this when a large center speaker is connected.
Select this when a small center speaker is connected. The subwoofer
Small (Default) (or front speakers) will produce center channel low-frequency
components.
Select this when no center speaker is connected. The front speakers will
None
produce center channel audio.
En
65