Yamaha RX-V571 Owner's Manual page 45

Press ENTER t ostartthesearch function.
Status
2 Press OPTION.
TUNER
ENTER
RETURN
The transmission search will begin upward from the current
frequency in approximately 5 seconds. Or, when the status
indicator reads "READY," you can begin the search
immediately by pressing ENTER.
• By pressing RETURN right before or during a search, it will return to the
"Option" menu.
• When the status is "READY," use the cursor keys ( A/_7 ) to start a search in
the specified direction. If no operation is performed for more than 5 seconds,
a search automatically starts upward.
- Cursor key (A): Searches upward from the current frequency.
- Cursor key (V): Searches downward from the current frequency.
When a traffic station is found, it will appear on the display and
the "Option" menu will close.
Traffic information broadcast station (Frequency)
• If the receiver cannot find a traffic station, "TP Not Found" will appear on the
display, and the "Option" menu will shortly close.
Combining audio from the radio with
video from an external device
While listening to the radio, favorite videos can be output on a TV
monitor.
Press TUNER to select "TUNER" as the input
source, and then choose the station that you want to
listen to.
Press the cursor keys (A/v)to select "Video Out."
Press ENTER.
Press the cursor keys (<diD) to select the desired
input video source.
Selectable video inputs
HDMI1-5 A video signal input from HDMI1-5 is output.
AV1-6 A video signal input from AV1-6 is output.
A video signal input from the VIDEO AUX jack on the
front display panel is output. When the external
V-AUX devices are connected to both HDMI IN jack and
VIDEO jack of the VIDEO AUX, the video signals input
from the HDMI IN jack are output.
Off (default) No video signals input from external devices is output.
Press OPTION to finish this operation.
En
45