Yamaha RX-V571 Owner's Manual page 55

ENTER
RETURN
When a USB device is connected to the unit, audio files in the
device, such as WAV (PCM format only), MP3, WMA and MPEG-4
AAC, can be played back.
• This unitis compatible with sampling frequency ofup to 48 kHzfor USB storage
devices.
Connecting a USB storage device
This unit supports USB mass storage class devices (FAT 16 or FAT
32 format, except USB HDDs). Refer to the manual for your USB
device also.
Connect the USB storage device to the USB port on
the front panel.
Controlling while watching a TV monitor
While watching a TV monitor, selecting songs and playback are
operated.
• To operate a USB storage device, connect the unit and a TV with an HDMI cable,
and change the input source on the TV to the video input from HDMI OUT jack of
the unit before operation.
Press USB to select "USB" as the input source.
2
• When "No device" appears on the TV monitor, make sure that the USB
storage device is connected to the unit properly.
Press the cursor keys to select a folder (directory) or
a song, and then press ENTER.
After selecting a song, playback starts and the Now Playing
view appears.
• Confirm that the USB storage device is facing the correct way when inserted
into the USB port.
• For details on connecting an iPod, refer to "Using a USB cable to connect an
iPod" (p.46).
• When connecting the USB storage device that contents many data files, it
may takes long time to load the files. During loading files, "Loading..." is
displayed on the front panel and TV monitor.
• Press RETURN or the cursor key (<_) to return to the previous screen.
• Files that are not compatible with the unit are not displayed.
En 55