Yamaha RX-V571 Owner's Manual page 25

Con necting playback devices
Change the combination of input jacks (video/audio)
When an input jack of the unit does not match an output jack of a video device, select
another jack of the unit to match the jack of the video device. The Following connections
become available with this setting.
AV1 (OPTICAL)
Optical HDMI 1-5
AV4 (OPTICAL)
HDMI Coaxial HDMI 1-5 AV2-3 (COAXIAL)
AV5-6 (AUDIO)
Analog stereo HDMI 1-5
AUDIO
AVl-2 AV5-6 (AUDIO)
Component video Analog stereo
(COMPONENTVIDEO) AUDIO
Necessary settings
As an example, the setting for connections, for which AV2 (COMPONENT VIDEO) jack
is used for video signals and AV5 (AUDIO) jacks are used for audio signals, is shown
below.
AV2
(COMPONENT VIDEO) jack
Video output
(Component video)
COMPONENT
VIDEO
Complete the connections for external devices (such as a TV and
playback device), the power cable and so on, and then turn on the
unit and the TV.
Change the input source setting of the TV to the video from the unit.
Press AV2 to select "AV2" as the video input jack of the unit.
Press OPTION.
Press the cursor keys (A/V) repeatedly to select "Audio In."
5 Press ENTER.
7 Press the cursor keys (q/D) repeatedly to select "AV5" as the input
source.
8
Input sources
HDMI1-5, AV1-2
Settings
HDMI1-5, AV1-6, AUDIO
Press OPTION.
All settings have been completed.
When switching the input source to "AV2" with the AV2 key, video and audio from
the video device are output from the unit.
En
25