Yamaha RX-V575 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Receiver
  5. RX-V575
  6. Owner's manual

Yamaha RX-V575 Owner's Manual

Hide thumbs Also See for RX-V575:
Table of Contents

Advertisement

Quick Links

See also: Setup Manual
AV Receiver
Owner's Manual
Read the supplied booklet "Safety Brochure" before using the unit.
English

Advertisement

Table of Contents
loading

Related Manuals for Yamaha RX-V575

Summary of Contents for Yamaha RX-V575

  • Page 1 AV Receiver Owner’s Manual Read the supplied booklet “Safety Brochure” before using the unit. English...

  • Page 2: Table Of Contents

    CONTENTS Accessories ............4 7 Connecting recording devices .
  • Page 3 APPENDIX Playing back music in multiple rooms (RX-V575 only) ... . . 61 Preparing Zone B ................. 61 Viewing the current status .

  • Page 4: Accessories

    YPAO microphone CD-ROM (Owner’s Manual) • The illustrations of the main unit and remote control used in this manual are of the RX-V575 (U.S.A. model), unless otherwise specified. • Some features are not available in certain regions. • Due to product improvements, specifications and appearance are subject to change without notice.

  • Page 5: Features

    . p.42 • Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . p.61 • Playing back music in multiple rooms (Zone B)* Network contents * RX-V575 only Speakers Audio Audio iPod/iPhone/iPad HDMI Control USB device 3D and 4K signals supported...

  • Page 6: Full Of Useful Functions

    Full of useful functions! Useful tips The combination of video/audio input jacks does not ❑ Connecting various devices (p.23) ❑ Creating 3-dimensional sound fields (p.38) match an external device... A number of HDMI jacks and various input/output jacks The Virtual Presence Speaker (VPS) function allows you Use “Audio In”...

  • Page 7: Part Names And Functions

    Part names and functions Front panel YPAO MIC DIRECT INFO MEMORY PRESET TUNING VOLUME SCENE RADIO VIDEO INPUT TONE CONTROL PROGRAM STRAIGHT PHONES SILENT CINEMA AUDIO VIDEO 2.1A z (power) key PRESET keys SCENE keys Turns on/off (standby) the unit. Select a preset FM/AM radio station (p.45).

  • Page 8: Front Display (Indicators)

    MUTE SBL SB SBR > HDMI ZONE indicators (RX-V575 only) Speaker indicators Lights up when HDMI signals are being input or output. “SP A” lights up when the Zone A speaker output is enabled Indicate speaker terminals from which signals are output.

  • Page 9: Rear Panel

    For connecting to a subwoofer (with built-in amplifier) (p.15). (General model only) DC OUT jack Selects the switch position according to your local voltage For supplying power to a Yamaha AV accessory. For details (p.29). on connections, refer to the instruction manual of the AV • (RX-V575 only) accessory.

  • Page 10: Remote Control

    Registers remote control codes of external devices on the SETUP OPTION remote control (p.85). Radio keys Operate the FM/AM radio (p.43). ZONE keys (RX-V575 only) ENTER VOLUME Switches to FM radio. Enable/disable the audio output to Zone A or Zone B (p.62). RETURN DISPLAY Switches to AM radio.

  • Page 11: Preparations

    PREPARATIONS General setup procedure Placing speakers (p.12) Select the speaker layout for the number of speakers that you are using and place them in your room. Connecting speakers (p.15) Connect the speakers to the unit. Connecting a TV (p.18) Connect a TV to the unit. Connecting playback devices (p.23) Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.

  • Page 12: Placing Speakers

    You can connect 2 subwoofers (with built-in amplifier) to the unit.* * RX-V575 only • RX-V575 supports 2- to 7.1-channel system, and RX-V475 supports 2- to 5.1-channel speaker system. • (RX-V575 only) Two subwoofers connected to the unit output the same sounds.
  • Page 13 2 3 4 5 6 7 8 9 10 Speaker placement 7.1-channel system (RX-V575 only) 5.1-channel system 10° to 30° 10° to 30° 10° to 30° 10° to 30° 30 cm (1 ft) or more 6.1-channel system (RX-V575 only) 4.1-channel system 10°...
  • Page 14 2 3 4 5 6 7 8 9 10 Speaker placement ■ 3.1-channel system Setting the speaker impedance (U.S.A. and Canada models only) Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.

  • Page 15: Connecting Speakers

    – – Audio pin cable (x1: for connecting a subwoofer) • (RX-V575 only) • When using only one surround back speaker, connect it to the You can connect 2 subwoofers (with built-in amplifier) to the unit. SINGLE jack (L side).

  • Page 16: Connecting Front Speakers That Support Bi-Amp Connections

    (Zone A) and in another room (Zone B). To connect the Zone B + (red) speakers, see “Playing back music in multiple rooms (RX-V575 only)” (p.61). - (black) Using a banana plug (U.S.A., Canada, China, Australia and General models only) a Tighten the speaker terminal.

  • Page 17: Input/Output Jacks And Cables

    Input/output jacks and cables ■ ■ ■ Video/audio jacks Video jacks Audio jacks ❑ HDMI jacks ❑ COMPONENT VIDEO jacks ❑ OPTICAL jacks Transmit digital video and digital sound through a single Transmit video signals separated into three Transmit digital audio signals. Use a digital optical jack.

  • Page 18: Connecting A Tv

    1 2 3 4 5 6 7 8 9 10 TV connection Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. About HDMI Control You can also enjoy playback of TV audio on the unit. HDMI Control allows you to operate external devices via HDMI.
  • Page 19 1 2 3 4 5 6 7 8 9 10 TV connection ❑ Necessary settings Configure the settings for HDMI Control. To use HDMI Control and ARC, you need to configure the following settings. a Enable HDMI Control on the TV and playback devices (such as HDMI For details on settings and operating your TV, refer to the instruction manual for the TV.

  • Page 20: Hdmi Control-Compatible Tv

    1 2 3 4 5 6 7 8 9 10 TV connection ■ ❑ Necessary settings Connection Method 2 (HDMI Control-compatible TV) To use HDMI Control, you need to configure the following settings. Connect the TV to the unit with an HDMI cable and a digital optical cable. For details on settings and operating your TV, refer to the instruction manual for the TV.
  • Page 21 1 2 3 4 5 6 7 8 9 10 TV connection ■ Connection Method 3 (TV with HDMI input jacks) Configure the settings for HDMI Control. Connect the TV to the unit with an HDMI cable and a digital optical cable. a Enable HDMI Control on the TV and playback devices (such as a HDMI Control-compatible BD/DVD player).
  • Page 22 1 2 3 4 5 6 7 8 9 10 TV connection ■ ❑ VIDEO (composite video) connection (with a video pin cable) Connection Method 4 (TV without HDMI input jacks) When connecting any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the MONITOR OUT unit, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks.

  • Page 23: Connecting Playback Devices

    1 2 3 4 5 6 7 8 9 10 Playback device connections Connecting playback devices ❑ MHL connection The unit is equipped with a variety of input jacks including HDMI input jacks to allow you to connect different types of playback devices. For information on how to connect Connect an MHL-compatible mobile device (such as smartphones) to the unit with an an iPod or a USB storage device, see the following pages.

  • Page 24: Component Video Connection

    1 2 3 4 5 6 7 8 9 10 Playback device connections ■ ■ Component video connection Composite video connection Connect a video device to the unit with a component video cable and an audio cable Connect a video device to the unit with a video pin cable and an audio cable (digital (digital optical or digital coaxial).

  • Page 25: Changing The Combination Of Video/Audio Input Jacks

    1 2 3 4 5 6 7 8 9 10 Playback device connections ■ Changing the combination of video/audio input jacks After connecting external devices (such as a TV and playback If the combination of video/audio input jacks available on the unit does not match your devices) and power cable of the unit, turn on the unit.

  • Page 26: Connecting Audio Devices (Such As Cd Players)

    1 2 3 4 5 6 7 8 9 10 Playback device connections Connecting audio devices (such as CD players) Connecting to the jacks on the front panel Connect audio devices such as CD players and MD players to the unit. Depending on Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as the audio output jacks available on your audio device, choose one of the following camcorders and portable audio players to the unit.

  • Page 27: Connecting The Fm/Am Antennas

    1 2 3 4 5 6 7 8 9 10 FM/AM antenna connections Connecting the FM/AM antennas Connect the supplied FM/AM antennas to the unit. Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface. FM antenna AM antenna The unit (rear)

  • Page 28: Connecting To A Network

    1 2 3 4 5 6 7 8 9 10 Network connections Connecting to a network Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable). • Some security software installed on your PC or the firewall settings of network devices (such as a router) You can enjoy Internet radio or music files stored on media servers, such as PCs and may block the access of the unit to the network devices or the Internet.

  • Page 29: Connecting Recording Devices

    1 2 3 4 5 6 7 9 10 Recording device connections Power cable connection Connecting recording devices Connecting the power cable You can connect video/audio recording devices to the AV OUT jacks. These jacks Before connecting the power cable (General model only) output analog video/audio signals selected as the input.

  • Page 30: Selecting An On-Screen Menu Language

    1 2 3 4 5 6 7 8 9 Language setting Selecting an on-screen menu language CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER RECEIVER z RECEIVER z Select the desired on-screen menu language from English HDMI HDMI To exit from the menu, press SETUP. (default), Japanese, French, German, Spanish, Russian, Italian and Chinese.

  • Page 31: Optimizing The Speaker Settings Automatically (Ypao)

    SOURCE RECEIVER RECEIVER RECEIVER z RECEIVER z The Yamaha Parametric room Acoustic Optimizer (YPAO) function HDMI HDMI Place the YPAO microphone at your listening detects speaker connections, measures the distances from them to your listening position(s), and then automatically optimizes the...
  • Page 32 1 2 3 4 5 6 7 8 9 10 Automatic speaker setup CODE SET CODE SET • To cancel the operation, disconnect the YPAO microphone, or use the • A speaker with a problem is indicated by blinking of the speaker indicators in SOURCE RECEIVER SOURCE/RECEIVER...

  • Page 33: Error Messages

    Use the cursor keys (e/r) to select the Exit YPAO, and turn off and on the unit. If this error occurs E-10:Internal Err. An internal error has occurred. repeatedly, contact the nearest authorized Yamaha dealer or desired operation. (E-10:INTERNAL) service center.

  • Page 34: Warning Messages

    1 2 3 4 5 6 7 8 9 10 Automatic speaker setup Warning messages If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions. However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings. Warning message Cause Remedy...

  • Page 35: Playback

    PLAYBACK CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI Basic playback procedure Input selection keys Turn on the external devices (such as a TV or V-AUX ZONE ZONE BD/DVD player) connected to the unit. AUDIO TUNER TUNER PRESET PRESET TUNING TUNING Use the input selection keys to select an input...

  • Page 36: Selecting The Input Source And Favorite Settings With One Touch

    Configuring scene assignments HDMI sound program, Compressed Music Enhancer on/off, and target Input selection keys zones (RX-V575 only) with just one touch. Perform the following operations to prepare the Press SCENE. settings you want to assign to a scene. V-AUX...

  • Page 37: Selecting The Sound Mode

    Selecting the sound mode CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER The unit is equipped with a variety of sound programs and HDMI HDMI surround decoders that allow you to enjoy playback sources with • You can also switch the sound programs and surround decoder by pressing your favorite sound mode (such as sound field effect or stereo PROGRAM on the front panel.

  • Page 38: Enjoying Sound Field Effects (Cinema Dsp)

    You’ll never get tired listening for long periods. The unit is equipped with a variety of sound programs that utilize Yamaha’s original DSP technology (CINEMA DSP). It allows you to easily create sound fields like actual movie This program reproduces monaural video sources, such as classic movies, in an atmosphere of a good old movie theater.
  • Page 39 2 channels and output from the front speakers (this program does not utilize CINEMA DSP). (RX-V575: 7ch Stereo, RX-V475: 5ch Stereo) Use this program to output sound from all speakers. When you play back...

  • Page 40: Enjoying Unprocessed Playback

    MODE Enjoying sound field effects without surround speakers (Virtual CINEMA DSP) • (RX-V575 only) To enable 6.1/7.1-channel playback from 5.1-channel sources when surround If you select one of the sound programs (except 2ch Stereo and back speakers are used, set “Extended Surround” (p.65) in the “Option” menu to a 7ch/5ch Stereo) when no surround speakers are connected, the setting other than “Off”.

  • Page 41: Enjoying Pure High Fidelity Sound (Direct Playback)

    MUTE Neo: 6 Music Uses the DTS Neo: 6 decoder suitable for music. * RX-V575 only (RX-V575 only) • You cannot select the Dolby Pro Logic IIx decoders when headphones are connected or when “Surround Back” in the “Setup” menu is set to “None”.

  • Page 42: Enjoying Compressed Music With Enhanced Sound (Compressed Music Enhancer)

    Enjoying compressed music with enhanced CODE SET CODE SET sound (Compressed Music Enhancer) SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI Compressed Music Enhancer adds depth and breadth to the V-AUX V-AUX sound, allowing you to enjoy a dynamic sound close to the original ZONE ZONE AUDIO...

  • Page 43: Listening To Fm/Am Radio

    Listening to FM/AM radio CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER You can tune into a radio station by specifying its frequency or Selecting a frequency for reception HDMI HDMI selecting from registered radio stations. Press FM or AM to select a band. •...

  • Page 44: Registering Favorite Radio Stations (Presets)

    Registering favorite radio stations (presets) CODE SET CODE SET • To specify the preset number from which to start the registration, press SOURCE SOURCE RECEIVER RECEIVER You can register up to 40 radio stations as presets. Once you have PRESET or cursor keys (q/w) to select a preset number within 5 seconds HDMI HDMI after step 4 (while “READY”...
  • Page 45 ■ ■ Selecting a preset station Clearing preset stations CODE SET CODE SET Tune into a registered radio station by selecting its preset number. Clear radio stations registered to the preset numbers. SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI Press FM or AM to select “TUNER” as the input Press FM or AM to select “TUNER”...

  • Page 46: Radio Data System Tuning

    Radio Data System tuning CODE SET CODE SET • “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not SOURCE SOURCE RECEIVER RECEIVER (U.K. and Europe models only) displayed if the radio station does not provide the Radio Data System HDMI HDMI service.

  • Page 47: Playing Back Ipod Music

    Playing back iPod music You can play back iPod music on the unit using a USB cable Connecting an iPod supplied with the iPod. Connect your iPod to the unit with the USB cable supplied with the iPod. • An iPod may not be detected by the unit or some features may not be compatible, depending on the model or software version of the iPod.

  • Page 48: Playback Of Ipod Content

    Playback of iPod content CODE SET CODE SET • To return to the previous screen, press RETURN. SOURCE SOURCE RECEIVER RECEIVER Follow the procedure below to operate the iPod contents and start • To switch between the browse and playback screens during playback, press HDMI HDMI playback.

  • Page 49: Playback Screen

    ■ ■ Playback screen Operating the iPod itself or remote control CODE SET CODE SET (simple play) SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI i P o d Press MODE to switch to the simple play mode. N o w P l a y i n g The TV menu screen turns off and iPod operations are A r t i s t N a m e A l b u m N a m e...
  • Page 50 ■ Repeat/shuffle settings CODE SET CODE SET You can configure the repeat/shuffle settings of your iPod. SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI • During simple play, configure the repeat/shuffle settings directly on your iPod or press MODE to display the TV menu screen and then follow the procedure below. V-AUX V-AUX When “USB”...

  • Page 51: Playing Back Music Stored On A Usb Storage Device

    Playing back music stored on a USB storage device CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER You can play back music files stored on a USB storage device on HDMI HDMI the unit. Refer to the instruction manuals for the USB storage •...
  • Page 52 ■ Browse screen CODE SET CODE SET Use the cursor keys to select an item and press SOURCE SOURCE RECEIVER RECEIVER ENTER. HDMI HDMI U S B If a song is selected, playback starts and the playback T o p screen is displayed.
  • Page 53 ■ ■ Playback screen Repeat/shuffle settings CODE SET CODE SET You can configure the repeat/shuffle settings for playback of USB SOURCE SOURCE RECEIVER RECEIVER storage device contents. HDMI HDMI U S B N o w P l a y i n g When “USB”...

  • Page 54: Playing Back Music Stored On Media Servers (Pcs/Nas)

    Playing back music stored on media servers (PCs/NAS) CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER You can play back music files stored on your PC or Playback of PC music contents HDMI HDMI DLNA-compatible NAS on the unit. Follow the procedure below to operate the PC music contents and start playback.
  • Page 55 ■ Browse screen CODE SET CODE SET Use the cursor keys to select an item and press SOURCE SOURCE RECEIVER RECEIVER ENTER. HDMI HDMI S E R V E R If a song is selected, playback starts and the playback N A S A screen is displayed.
  • Page 56 ■ ■ Playback screen Repeat/shuffle settings CODE SET CODE SET You can configure the repeat/shuffle settings for the playback of PC SOURCE SOURCE RECEIVER RECEIVER music content. HDMI HDMI S E R V E R N o w P l a y i n g When “SERVER”...

  • Page 57: Listening To Internet Radio

    Listening to Internet radio CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER You can listen to Internet radio stations from all over the world. HDMI HDMI Press NET repeatedly to select “NET RADIO” as the You can control the Internet radio with the menu displayed on the input source.
  • Page 58 ■ ■ Browse screen Playback screen CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI N E T R A D I O N E T R A D I O T o p N o w P l a y i n g B o o k m a r k s L o c a t i o n s S t a t i o n N a m e...

  • Page 59: Playing Back Itunes/Ipod Music Via A Network (Airplay)

    Playing back iTunes/iPod music via a network (AirPlay) The AirPlay function allows you to play back iTunes/iPod music on Playback of iTunes/iPod music contents the unit via network. Follow the procedure below to play back iTunes/iPod music iTunes contents on the unit. Turn on the unit, and start iTunes on the PC or display the playback screen on the iPod.
  • Page 60 Use the following remote control keys to control playback. CODE SET CODE SET • You can turn on the unit automatically when starting playback on iTunes or iPod by SOURCE SOURCE RECEIVER RECEIVER External device Function setting “Network Standby” (p.81) in the “Setup” menu to “On”. operation keys HDMI HDMI...

  • Page 61: Playing Back Music In Multiple Rooms (Rx-V575 Only)

    Trim” in the “Option” menu (p.62). Also, you can adjust the volume for Zone B separately (p.62). • You can automatically enable/disable the audio output to Zone A/B in conjunction with a scene selection (p.36) Zone B Zone A PLAYBACK ➤ Playing back music in multiple rooms (RX-V575 only)
  • Page 62 SCENE (BD/DVD) for more than 3 seconds. • To return to the previous screen during menu operations, press RETURN. • Text in parentheses denotes indicators on the front display. SOURCE/RECEIVER blinks twice. PLAYBACK ➤ Playing back music in multiple rooms (RX-V575 only)

  • Page 63: Viewing The Current Status

    Viewing the current status CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER HDMI HDMI Switching information on the front display Press INFO. V-AUX V-AUX ZONE ZONE Each time you press the key, the displayed item changes. AUDIO AUDIO TUNER TUNER VOL.

  • Page 64: Configuring Playback Settings For Different Playback Sources

    L i p s y n c DSP/Surround S i g n a l I n f o (DSP/Surround) A u d i o I n (RX-V575 only) Extended Surround Selects how to play back 5.1- to 7.1-channel sources (EXTD) when surround back speakers are used.
  • Page 65 -6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments Default ❑ Extended Surround (EXTD) Bypass (Bypass) (RX-V575 only) Selects how to play back 5.1- to 7.1-channel sources when surround back speakers • If you set an extreme value, sounds may not match those from other channels. are used.
  • Page 66 ■ Lipsync (Lipsync) Enables/disables the adjustment configured in “Lipsync” (p.76) in the “Setup” menu. • Some early Dolby Digital EX or DTS-ES sources do not contain a flag for reproducing surround back channel. We recommend you set “Extended Surround” to “bPLIIx Movie” or “EX/ES” when playing back those sources.
  • Page 67 ■ ■ Audio In (Audio In) Volume Interlock (Interlock) Combines the video jack of the selected input source (HDMI 1–5 or AV 1–2) with an Enables/disables volume controls from iTunes/iPod via AirPlay. audio jack of others. For example, use this function in the following cases. Settings •...

  • Page 68: Configurations

    CONFIGURATIONS Configuring various functions (Setup menu) You can configure the unit’s various function with the menu displayed on the TV screen. • Operations with TV screen are available only when your TV is connected to the unit via HDMI. If not, carry out operations while viewing the front display.

  • Page 69: Setup Menu Items

    Setup menu items Menu Item Function Page (RX-V575 only) Power Amp Assign Selects a speaker system. Subwoofer Selects whether or not a subwoofer is connected. Front Selects the size of the front speakers. Selects whether or not a center speaker is connected and its size.
  • Page 70 Sets the maximum volume to prevent excessive loudness. Volume Initial Volume Sets the initial volume for when this receiver is turned on. (RX-V575 only) ZoneB Volume Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A. Auto Power Standby Sets the amount of time for the auto-standby function.

  • Page 71: Speaker

    The front speakers will produce all of the front channel frequency components. ❑ Power Amp Assign (RX-V575 only) Selects a speaker system. • “Front” is automatically set to “Large” when “Subwoofer” is set to “None”. In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations ❑...
  • Page 72 Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch the subwoofer phase. ❑ Surround Back Settings (RX-V575 only) Normal (default) Does not reverse the subwoofer phase. Selects whether or not surround back speakers are connected and their sizes.
  • Page 73 Choices Set “EQ Select” to “GEQ”. Front L, Front R, Center, Surround L, Surround R, Surround Back L (RX-V575 only), Use the cursor keys (q/w) to select “Channel” and the cursor keys (e/r) to select Surround Back R (RX-V575 only), Subwoofer the desired speaker channel.

  • Page 74: Hdmi

    HDMI HDMI OUT (TV) Enables/disables the audio output from a TV connected to the HDMI OUT jack. Configures the HDMI settings. Settings Off (default) Disables the audio output from the TV. S e t u p Enables the audio output from the TV. S p e a k e r C o n f i g u r a t i o n H D M I...

  • Page 75: Sound

    Choices (SCENE keys) spacious sound field in combination with the surround sound field. This setting is BD/DVD, TV, NET, RADIO effective when “bPLII Music” or “bPLIIx Music” (RX-V575 only) is selected. Settings Settings Disables SCENE link playback for the selected SCENE key.
  • Page 76 This Adjust the audio output timing in “Adjustment”. setting is effective when “bPLII Music” or “bPLIIx Music” (RX-V575 only) is selected. Adjusts the delay between video and audio output automatically when...

  • Page 77: Eco

    ❑ ZoneB Volume • Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the front display. (RX-V575 only) Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A. Settings Adjusts the volume for Zone B in conjunction with the volume for Sync.

  • Page 78: Input Rename

    ■ ECO Mode Function Enables/disables the eco (power saving) mode. Configures the functions that make the unit easier to use. When the eco mode is enabled, you can reduce the unit’s power consumption. Settings S e t u p Off (default) Disables the eco mode.

  • Page 79: Dimmer

    Configures the DC OUT jack setting. To exit from the menu, press SETUP. ❑ Power Mode ■ Dimmer Selects how to supply power to the Yamaha AV accessory connected to the DC OUT Adjusts the brightness of the front display. jack. Setting range Settings...

  • Page 80: Network

    ■ Network IP Address Configures the network parameters (such as IP address). Configures the network settings. ❑ DHCP Select whether to use a DHCP server. S e t u p S p e a k e r I n f o r m a t i o n Settings H D M I I P A d d r e s s...

  • Page 81: Network Standby

    ■ ■ MAC Address Filter Network Standby Sets the MAC address filter to limit access to the unit from other network devices. Selects whether the unit can be turned on from other network devices (network standby). ❑ Filter Settings Enables/disables the MAC address filter. Off (default) Disables the network standby function.

  • Page 82: Language

    ■ Network Update Language Updates the firmware via the network. Select an on-screen menu language. ❑ Perform Update Starts the process to update the unit’s firmware. For details, see “Updating the unit’s S e t u p firmware” (p.88). S p e a k e r E n g l i s h H D M I F r a n ç...

  • Page 83: Configuring The System Settings (Advanced Setup Menu)

    Press z (power) to set the unit to standby mode and turn it on again. Change the unit’s remote control ID so that it matches the remote control’s ID (default: ID1). When using multiple Yamaha AV receivers, you can set each remote control with a The new settings take effect.

  • Page 84: Changing The Fm/Am Tuning Frequency Setting (Tu)

    Changing the FM/AM tuning frequency setting (TU) Updating the firmware (UPDATE) (Asia and General models only) UPDATE FM50/AM9 New firmware that provides additional features or product improvements will be released as needed. Updates can be downloaded from our website. If the unit is Change the FM/AM tuning frequency setting of the unit depending on your country or connected to the Internet, you can download the firmware via the network.

  • Page 85: Controlling External Devices With The Remote Control

    OPTION OPTION • Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all the input selection keys. With this setting, you can control HDMI can control it using the TV operation keys, regardless of the input Control-compatible devices connected to the unit with the remote control.

  • Page 86: Registering The Remote Control Codes For Playback Devices

    ■ Registering the remote control codes for Playback device operations SOURCE z CODE SET CODE SET playback devices Once you have registered the remote control code for your SOURCE RECEIVER SOURCE/RECEIVER playback device, you can control it using the following keys after HDMI selecting the input source or scene.

  • Page 87: Resetting Remote Control Codes

    Resetting remote control codes CODE SET CODE SET SOURCE RECEIVER SOURCE/RECEIVER You can reset a remote control code registered to each input HDMI selection key. Input selection keys Press CODE SET using a pointed object such as the tip of a ballpoint pen. V-AUX ZONE ZONE...

  • Page 88: Updating The Unit's Firmware Via The Network

    Updating the unit’s firmware via the network CODE SET CODE SET SOURCE SOURCE RECEIVER RECEIVER New firmware that provides additional features or product HDMI HDMI improvements will be released as needed. If the unit is connected • To cancel the operation without updating the firmware, press SETUP. to the Internet, you can download the firmware via the network and update it.

  • Page 89: Appendix

    (p.77). Yamaha product or another remote control may work on the unit. If this happens, register different remote control IDs for the devices that you want to control with each remote control (p.83).

  • Page 90: Troubleshooting

    The power does not turn on. consecutively. If the unit is in this condition, the standby indicator nearest Yamaha dealer or service center to request repair. on the unit blinks when you try to turn on the power. Hold down z (power) on the front panel for more than 10 seconds to initialize The internal microcomputer has frozen, due to an external electric The power does not turn off.
  • Page 91 Problem Cause Remedy The unit is out of the operating range. Use the remote control within the operating range (p.4). The batteries are weak. Replace with new batteries. The unit’s remote control sensor is exposed to direct sunlight or Adjust the lighting angle, or reposition the unit. strong lighting.

  • Page 92: Audio

    “Signal Info” in the “Option” menu (p.66). No sound. (RX-V575 only) Press ZONE A (ZONE B) to enable audio output to Zone A (or Zone B). Audio output to Zone A (or Zone B) is disabled.
  • Page 93 Problem Cause Remedy The TV does not support HDCP (High-bandwidth Digital Content Refer to the instruction manuals for the TV and check the TV’s specifications. Protection). No sound from the playback device (connected to The unit is set not to output audio input through HDMI jacks from In “Audio Output”...

  • Page 94: Video

    Video Problem Cause Remedy Another input source is selected on the unit. Select an appropriate input source with the input selection keys. Another input source is selected on the TV. Switch the TV input to display the video from the unit. Check the video output setting of the playback device.

  • Page 95: Usb And Network

    USB and network Problem Cause Remedy The USB device is not connected to the USB jack securely. Turn off the unit, reconnect your USB device, and turn the unit on again. The unit does not detect the USB device. The file system of the USB device is not FAT16 or FAT32. Use a USB device with FAT16 or FAT32 format.

  • Page 96: Error Indications On The Front Display

    Turn off the iPod and then turn it on again. Internal Error An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center. An overcurrent is flowing through the MHL-compatible mobile MHL Overloaded Turn off the unit and check the connection between the unit and mobile device.

  • Page 97: Glossary

    Glossary Audio information DTS Express DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray discs). ■...

  • Page 98: Hdmi And Video Information

    Sampling frequency/Quantization bit HDMI and video information Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal is digitized. These values are noted as in the following example: “48 kHz/24-bit”. Component video signal • Sampling frequency With the component video signal system, the video signal is separated into the Y signal for luminance and Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate.

  • Page 99: Yamaha Technologies

    (such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP, Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own home.

  • Page 100: Video Signal Flow

    Video signal flow Information on HDMI Video signals input from a video device to the unit are output to a TV as shown below. HDMI Control Video device The unit HDMI Control allows you to operate external devices via HDMI. If you connect a TV that supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as power and volume) with TV remote control operations.
  • Page 101 (Example) Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. HDMI Control HDMI Control • If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in Playback starts Turns on and displays Step 3.

  • Page 102: Hdmi Signal Compatibility

    HDMI signal compatibility Audio signals Audio signal type Audio signal format Compatible media (example) 2ch Linear PCM 2ch, 32 to 192 kHz, 16/20/24 bit CD, DVD-Video, DVD-Audio DVD-Audio, BD (Blu-ray disc), Multichannel Linear PCM 8ch, 32 to 192 kHz, 16/20/24 bit HD DVD 2 to 5.1ch, 2.8224 MHz, 1 bit SACD...

  • Page 103: Reference Diagram (Rear Panel)

    OPTICAL COAXIAL COAXIAL OPTICAL SUBWOOFER ( TV ) PRE OUT AUDIO (RX-V575 U.S.A. model) • The area around the video/audio output jacks is marked in white on the actual product to prevent improper connections. APPENDIX ➤ Reference diagram (rear panel)

  • Page 104: Trademarks

    “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically “SILENT CINEMA” is a trademark of Yamaha Corporation. to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.

  • Page 105: Specifications

    TUNER - VGA • Analog Audio - 480i/60 Hz • Analog Tuner [RX-V575] - 576i/50 Hz [U.K. and Europe models] - Speaker Out x 7 (FRONT L/R, CENTER, SURROUND L/R, - 480p/60 Hz FM/AM with Radio Data System x 1 (TUNER)
  • Page 106 Center ................95 W Surround L/R............95 W+95 W • Maximum Input Signal Surround Back L/R [RX-V575] ....... 95 W+95 W AV 5 etc. (1 kHz, 0.5% THD, Effect On) ......2.3 V • Output Level / Output Impedance AV OUT.............. 200 mV/1.2 kΩ...
  • Page 107 * Including legs and protrusions • Weight • 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.) Mono..............3 µV (20.8 dBf) [RX-V575] ............8.2 kg (18.1 lbs) [RX-V475] ............8.1 kg (17.9 lbs) • Signal to Noise Ratio (IHF) Mono................71 dB Stereo ................

  • Page 108: Index

    Index Symbols Audio Output (HDMI, Setup menu) Component video connection (video device) Audio Return Channel (ARC) COMPONENT VIDEO jack ★/★★ keys Auto Power Standby (ECO, Setup menu) Composite video connection (video device) Envelope icon (p) Auto Preset (FM radio, Option menu) Compressed Music Enhancer Lock icon (o) Automatic speaker setting optimization...
  • Page 109 Dolby Pro Logic IIx Movie (Extended Surround) Format (Signal Info, Option menu) Input Trim (Volume Trim, Option menu) Dolby Pro Logic IIx Movie (surround decoder) Frequency (FM/AM radio) Interlock (Option menu) Dolby Pro Logic IIx Music (Extended Surround) Frequency step setting Internal Err.
  • Page 110 MOVIE (sound program category) PC content playback Router connection Multiple room playback PEQ (Equalizer, Setup menu) MUSIC (sound program category) Perform Update (Network Update, Setup menu) SAMPL (Signal Info, Option menu) Music Video (sound program) PHONES jack Sampling (Signal Info, Option menu) MUTE key Playback device connection SBR →...
  • Page 111 Standby Through (HDMI, Setup menu) TV FORMAT (ADVANCED SETUP menu) YPAO (Yamaha Parametric room Acoustic Optimizer Station preset (FM/AM radio) TV operation (remote control) YPAO error message Status (Information, Setup menu) TV operation key (remote control) YPAO MIC jack Stereo mini jack...
  • Page 112 © 2013 Yamaha Corporation YF213A0/EN...

This manual is also suitable for:

Rx-v475Htr-5066Htr-4066

Table of Contents