Yamaha RX-V571 Owner's Manual page 35

=SOURCE/
RECEIVER
With the SCENE function, an input source and registered settings
(the sound program/surround decoder, Compressed Music
Enhancer, etc.) can be selected with a single key.
Press SCENE.
The registered settings on SCENE that you pressed are
reflected. When the unit is in standby mode, press this key to
turn it on.
Default settings for each SCENE are as follows.
BD/DVD HDMI1 STRAIGHT Off On
TV AV4 STRAIG HT On On
CD AV3 STRAIGHT Off Off
RADIO TUNER 7ch Stereo On Off
When external devices, such as a TV or BD/DVD player
compatible with the HDMI control function, are connected to the
unit, the HDMI control functions are enabled on the unit and the
external devices and "SCENE" in the "Setup" menu is set to
"On" for the corresponding SCENE, operations of the external
device may be reflected by switching SCENE as follows.
• TV is turned on.
• TV is switched to a video input source that is connected to the unit.
• External device starts playback.
• The SCENE synchronization setting can be set for each SCENE. For details,
refer to the "SCENE" (p.73) in the "Setup" menu.
Changing the settings for the SCENE
function
2
Do the following steps to select the settings that you
want to register for SCENE.
• Selecting the input source (p.34)
• Selecting the sound program (p.36)
• Enabling/disabling Compressed Music Enhancer (p.40)
• Enabling/disabling the SCENE synchronization function
(p.73)
Press and hold SCENE on the remote control or
front panel until "SET Complete" appears on the
front panel.
3
When the input source setting of each SCENE is changed, the
corresponding SCENE key setting on the remote control also
needs to be changed. Refer step 3 to configure the setting for
the remote control.
(If necessary) Press and hold the corresponding
SCENE key and input selection key together for
more than 3 seconds.
Once the setting is completed successfully, SOURCE/
RECEIVER blinks twice.
• Apply the corresponding remote control code to the input selection key to
control the playback device with the unit's remote control. For details on how
to apply the remote control code, refer to "Registering remote control codes
for external device operations" (p.79).
En
35