Yamaha RX-V571 Owner's Manual page 49

USB
ENTER
RETURN
Controlling while watching a TV monitor
When connecting iPod with a USB cable or iPod dock, iPod can be
controlled with the TV monitor.
• To operate an iPod on a TV monitor, connect the unit and TV with an HDMI cable,
and change the input source on the TV to the video input from HDMI OUT jack of
the unit before operation.
• An iPod connected to the iPod wireless system cannot be operated on a TV
monitor.
Select the input source to which the iPod is
connected.
When using the USB cable to connect the iPod:
Press USB to select "USB" as the input source.
When using the iPod dock to connect the iPod:
Press DOCK to select "DOCK" as the input source.
The following display is for the USB input source.
2
Press the cursor keys to select the content, and then
press ENTER to confirm the selection.
After selecting a song, playback starts and the Now Playing
view appears.
• Press RETURN or the cursor key (<_) to return to the previous screen.
• When "No device" appears on the TV monitor, make sure that the iPod is
connected to the unit properly.
En
49