Yamaha RX-V571 Owner's Manual page 19

_ Connecting a TV __
Configure the settings for ARC.
(_) Confirm that the ARC function for the TV is set to on.
For details on how to confirm, refer to manual of the TV.
(_) Change the input settings for the TV to video signals from the unit.
(_) Press SETUP.
SETUP
keys
ENTER
@ Press the cursor keys (<_/_>) to select "HDMU'
(_) Press the cursor keys (A/V) to select "HDMI Control," and then press ENTER.
_) Press the cursor keys (A/V) to select "On," and then press ENTER.
(_ Confirm that "ARC" is set to "On."
• "ARC" is set to "On" as the default setting. When "HDMI Control" is set to "On," the ARC function of
the unit is enabled.
(_) Press SETUP.
3
Configure the settings for HDMI Control.
(_) Activate the HDMI control function of the TV and the devices that support the HDMI
control function.
For details on setting the HDMI control function, refer to the manual of each device.
(_) Turn off the TV.
The unit and devices are also turned off automatically with the TV's operation. If they
do not turn off, turn them off manually.
(_) Turn on the TV.
The unit also turns on with the TV. If the unit does not turn on, turn it on manually.
@ Change input video source on the TV to video signals from the unit.
(_) Turn on the playback devices, and then confirm the following:
Unit: Whether the input signals from the playback devices are selected as the HDMI
input source (any of "HDMI 1-5"). When it is not selected, select the correct input
source manually.
TV: Whether the video signals from the playback devices are displayed on the TV
screen.
_) Confirm whether the unit is linked with operations of the TV remote control as follows
Turning on/standby, volume control and selecting audio output devices.
If these operations are not available, check that "HDMI Control" (p.72) in the "Setup"
menu is set to "On."
• If playing back audio source by using the ARC function has a problem, set "ARC" in the "Setup" menu
to "Off," and connect the TV and the unit with an optical cable (p.20).
• If the HDMI control function does not work correctly, it may be effective to turn off the devices to reset
them or plug in the power cable and retry with the power cable plugged in.
• If the power-on operation is not linked, confirm the priority of audio output settings for the TV.
All settings have been completed.
When a TV program is selected with the TV remote control, input source of the unit is
switched to "AV4" automatically, and TV sound is output.
If it does not work correctly, confirm that the "ARC" in the "Setup" menu is set to "On."
• "AV4" is selected as the input sound source from a TV as the default setting. When the AV4 jack is
used for another device, select an input jack to be used for the TV audio in "TV Audio Input" on the
"Setup" menu. Also, when using the SCENE functions (p.35), register the appropriate input source on
SCENE (TV).
En
19