Table of Contents
Advertisement
Brightness status indicator bar
The Brightness status indicator bar shows, and allows you to adjust, the brightness
setting for the selected input. Brightness adjusts the light intensity of the image on
the screen. Use the front panel or IR remote control
brightness control through a range of 0 to 128. The default setting is 64.
Contrast status indicator bar
The Contrast status indicator bar shows, and allows you to adjust, the contrast
setting for the selected input. Contrast adjusts the difference between the input
signal's brightest and darkest settings. Use the front panel or IR remote control
and buttons to adjust the contrast through a range of 0 to 128. At the minimum
setting, 0, the entire picture is shown at about the same brightness (gray). At the
maximum setting, 128, there is a marked difference between the dark and light
areas of the image. The default setting is 45 for high resolution inputs and 59 for
low resolution inputs.
Color status indicator bar
The color adjustment is available for interlaced component video, S-video, and
composite video inputs only. See the table on page 3-9.
The Color status indicator bar shows, and allows you to adjust, the color setting for
the selected input. Color increases and decreases the color intensity of the picture.
Use the front panel or IR remote control
through a range of 0 to 128. At the minimum setting, 128, the switcher removes
most of the color. The default setting is 64.
Tint status indicator bar
The tint adjustment is available for S-video and composite video inputs only.
See the table on page 3-9.
The tint status indicator bar shows, and allows you to adjust, the tint setting.
Tint is a relative measure of the amount of white in a given color and adjusts the
picture's color toward red or green. Use the front panel or IR remote control
buttons to adjust the tint control through a range of 0 to 128. Press the
increase the green (and decrease the red). Press the button to increase the red
(and decrease the green). The default setting is 64.
Sharpness status indicator bar
The Sharpness status indicator bar shows and allows you to adjust the sharpness
setting. Sharpness uses variable filtering to affect input picture detail and
definition. Use the front panel or IR remote control
decrease the sharpness filtering through a range of 0 to 128. The default setting
is 64.
IN1508 Scaling Presentation Switcher • Operation
and buttons to adjust the
and buttons to adjust the contrast
and buttons to increase or
and
button to
3-19
Advertisement
Table of Contents
