Table of Contents
Advertisement
Using your HS-U270to recordfrom another VCR
HS-U270
[RECORDING]
[ PLAYBACK
I
tt
VIDEO OUT---_I---AUDIO
OUT
O
O
O
O
Connect
one RCA audio cable to the AUDIO
OUTPUT
terminal
on the other VCR.
Connect
the other end of this cable to the
AUDIO INPUT
terminal
on the HS-U270
(labeled
AUDIO IN.)
Connect
a video cable to the VIDEO
OUT-
PUT terminal
on the playback
VCR. Con-
nect the other end of this cable to the
VIDEO INPUT
terminal
on the HS-U270
(labeled VIDEO IN).
Use the INPUT
button
to set the HS-U270
to External.
("L" will be displayed
on the
fluorescent
display.)
Put a blank tape into the HS-U270
and find
where you want to begin recording.
Press
PLAY/STOP.
O
O
O
O
O
Put the tape you want to copy into the
other VCR and find the place from which
you want to begin cop._4ng. Press
STOP.
On the HS-U270,
press REC or REC/OTR,
then PAUSE.
On the other VCR, press PLAY, then
PAUSE.
Release
the PAUSE
button
on both VCRs
at the same time.
When finished,
press PLAY/STOP
(or
STOP) on both VCRs.
59
Advertisement
Table of Contents
