Setting Upyourvcrfor Thefirsttime; Setting Up Your Vcr If You Are Using A - Mitsubishi HS-U260 Owner's Manual

Now that you've completed your antenna, VCR, and TV connec-
tions, you're ready to start enjoying your equipment. To get the
most satisfaction out of your VCR, you shmfld carefully read the
two sections, "Setting Up Your VCR for t:he First Time" and
"Viewing the Picture Coming from Your VCR." Then you can start
exploring what your new VCR can do.
In this chapter, you'll learn:
Setting Up Your VCR for the First Time
Using the Remote Control
$ Viewingthe Picture Comingfrom Your VCR
Loadingand UnloadingTapes
$ Playinga Tape
$ Selectingthe On-screenLanguage
Usingthe Audio and Video Functions
Usingthe Menus to Set the Time
$ Programmingthe VCRto ReceiveTV Channels
Setting the VCR Plus+ GuideChannel Numbers
$ Recording
Setting UpYourVCRfor theFirstTime
It's important that your VCR is set up con,ectly before you try to
work it. If you carefully read this section, :_ou will avoid confusion
later and get the most out of operating ymkr system.
This section teaches you about:
• Setting up your VCR ff you are usixg a regular _I_r, and
• Setting up your VCR ff you are usir.g a monitor _UV.
Setting up your VCR if you are using a reg,JlarTV
Turn on your TV and turn it to charmel 3 or 4, whichever is
NOT used for broadcast in your area.
Look at the back panel[ of the VCR and set the VIDEO CHAN-
NEL switch to channel 3 or 4, whichever is the santo as the
TV.
Turn the VCR on by pressing the POWER button.
17