Adjustingthe Tracking - Mitsubishi HS-U270 Owner's Manual

Chapter 4: UsingtheAdvanced Features Using the Advancerl Playback Controls (cont.)
52
High speed search (EP mode only) >
Speed search > /
Press REW button Playback
1/5 slow-motion playback
1/10 slow-motion playback
1/30 slow-motion playback ,_
Still , I
1/30 reverse slow-motion playback I ._
1/10 reverse stow-motion playback I /
1/5 reverse slow-motion playback |
_ Press
Reverse playback ]--- / Pre,, FF button
Reverse fast playback I
Reverse speed search _
Reverse high s-"_d _ _ _ | '_
using stilladjustment
Sometimes during still frame, the picture may vibrate or shake.
To correct this problem, press the CHANNEL buttons on the front
panel. (Side-to-side ,Abration cannot be corrected.)
using two timesplayback
You can see the contents of the videotape in double speed play-
back. While the VCR is playing a tape, press the INPUT button
on the remote control. You'll see the picture in double speed
playback. A certain amount of"noise" in the picture is normal. To
resume normal playback, press the PLAY!STOP button.
Adjustingthe tracking
automatic tracking
D (digital tracking) light
t
° rt_
I-I "1I'1 I'1 I'1 sP
II .1_ I.I =1.1I.I s
_Important:
Your VCR automatically adjusts the tape to give you the best
quality picture. When you press the PLAY/STOP button, the
DIGITAL TRACKING light (D) will flash, showing that the VCR
is adjusting the picture. When the VCR has finished adjusting the
picture, the DIGITAL TRAC, KING light will shine steadily.
A certain amount of "noise" in the picture is normal while the
VCR is tracking a tape.
manual t racking
From time to time, you might play a tape that has excess "noise"
in the picture (often looking like vibration or interference at the
top or bottom of the screen). To correct the picture, you will have
to manually track the tape.
O While the tape is playing, press the CHANNEL buttons on
the front panel until the picture is clear of excess "noise."
To continue automatic tracking, press both front panel
CHANNEL buttons at the same time. Automatic tracking will
also resume when you eject the tape.