Additional Features; Memory Backup In Case Of Power Failure; After A Power Failure; Displaying/Clearing The Power Loss List - Mitsubishi HS-1024E Installation And Operation Manual

Additional Features

Memory backup in case of power failure

This VCR includes a built-in backup memory, so the preset day
and present time will remain in memory even if there is a power
failure. However, if the power cord is disconnected for a long
period of time (2-3 months), the present time may not be
accurate. In this case, set the clock again.
Info.
• The battery is fully charged if the VCR's power cord is
plugged into the outlet for 40 or more hours per week.
• If the battery is fully charged, even if the power cord is not
plugged in, the following settings will remain in memory for
up to 31 days:
– The day and present time display
– Alarm list
– Power loss list
– Number of tape uses
– Counter display
– Recording/Playback mode
Note
• When ALARM REC DURATION of the RECORDING SET
UP menu is set to MAN1 or MAN2 and a power failure
occurs during the alarm recording, the VCR may not return
to the alarm recording mode when the power comes back
on.

After a power failure

If a power failure occurs during manual,
timer or alarm recording, the VCR will
return to the recording mode when the
power comes back on. The Power
Failure symbol (X) will be displayed for
about 1 minute on screen and the Power
Loss indicator ( ) will illuminate on the
fluorescent display when the power
comes back on. If a power failure occurs
while the VCR's power is on, the VCR will
turn on by itself when the power comes back on.

Displaying/clearing the power loss list

Displaying the power loss list
The power failure start time is logged in the VCR's Power Loss
List. To view the list, please follow the steps listed below.
1. Press MENU button.
• <MAIN MENU> appears.
2. Turn JOG to select MAINTENANCE
and turn SHUTTLE to the right.
• <MAINTENANCE> menu
appears.
3. Turn JOG to select POWER LOSS
LIST and turn SHUTTLE to the right.
• <POWER LOSS LIST> appears.
4. Press MENU button.
• The day and present time appears
on screen.
Note
• Up to 3 power failure start times will be displayed. If more
than 3 failures have occurred, the first start time and the last
2 start times will be displayed on the list.
14
Advanced Functions
Clearing the power loss list
1. Select POWER LOSS LIST CLEAR in
<MAINTENANCE> menu and turn
SHUTTLE to the right.
2. Turn SHUTTLE to the left to clear the
list.
•
3. Press MENU button.
•

Displaying/clearing the alarm list

Displaying the alarm list
The alarm recording start time are logged in the VCR's Alarm
List. To view the list, please follow the steps listed below.
1. Press MENU button.
•
2. Turn JOG to select MAINTENANCE
and turn SHUTTLE to the right.
•
3. Turn JOG to select ALARM LIST and
turn SHUTTLE to the right.
•
4. Press MENU button.
•
01-01-'01 MON
Note
00:00:00 X L24
• Maximum of 9,999 alarm recording start times will be
counted.
• Up to 8 alarm recording start times will be displayed. If more
than 8 alarm recordings have occurred, the first start time
and the last 7 start times will be displayed on the list.
Clearing the alarm list
1. Select ALARM LIST CLEAR in
<MAINTENANCE> menu and turn
SHUTTLE to the right.
2. Turn SHUTTLE to the left to clear the
list.
•
3. Press MENU button.
<MAINTENANCE>
POWER LOSS LIST
ALARM LIST
•
ALL MENU INITIALISE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
<REPEAT REC TIMES> 0
<ELAPSED TIME> 0H

Tape usage and elapsed time of VCR

REPEAT REC TIMES
<POWER LOSS LIST>
01 31-01-'01 00:00
02
03
ELAPSED TIME
1. Press MENU button.
•
2. Turn JOG to select MAINTENANCE
and turn SHUTTLE to the right.
•
3. Press MENU button.
•
Note A point to notice
To exit the menu without clearing
the list, press MENU button.
<MAINTENANCE> menu appears.
Once the list is cleared, the Power Loss indicator ( ) will
go off.
<MAIN MENU> appears.
<MAINTENANCE> menu appears.
<ALARM LIST> appears.
The day and present time appears
on screen.
To exit the menu without clearing
the list, press MENU button.
<MAINTENANCE> menu appears.
Once the list is cleared, the Alarm Recording indicator
( ) on the fluorescent display will go off.
indicates how many times a tape has
been recorded over since it was first
inserted.
indicates the total times the VCR has
been used for recording or playback.
<MAIN MENU> appears.
<REPEAT REC TIMES> and
<ELAPSED TIME> are shown at
the bottom of the
<MAINTENANCE> menu.
The day and present time display
appears on screen.
Supplementary information
Info.
POWER LOSS LIST CLEAR
Turn the SHUTTLE RING
then POWER LOSS LIST
will be cleared.
<MAINTENANCE>
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALISE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
<REPEAT REC TIMES> 0
<ELAPSED TIME> 0H
<ALARM LIST>
0001 31-01-'01 00:00
0002
0003
0004
0005
0006
0007
0008
ALARM LIST CLEAR
Turn the SHUTTLE RING
then ALARM LIST will be
cleared.
<MAINTENANCE>
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALISE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
<REPEAT REC TIMES> 0
<ELAPSED TIME> 0H