Setting A Shared Encryption Key - Panasonic KX-VC300 User Manual

call can still be established if the encryption
keys match.
Document Version 2012-03
Setting up KX-VC Series NAT Traversal Service
Setting a Shared Encryption
Key
Note
•
There is a danger that encryption settings will
be changed by a third party. Therefore, be
careful when managing the administrator
password and giving users the authority to
change encryption settings.
1.
Perform steps 1–6 in "If the unit has been used
before".
•
The admin menu screen is displayed.
2.
Use [ ][ ] to select "Encryption" and press
[Enter].
•
The encryption settings screen is displayed.
3.
Use [ ][ ] to select the following items for input:
"Access mode": Use [
"Encryption": Use [
Note
•
If the "Encryption" setting does not match
that of the other party in a video conference
call, the video conference call will not start.
"Encryption Key": Enter an encryption key (4 to
256 characters [alphanumeric, space, symbols]).
Note
•
&, <, >, comma (,), double quotation mark
(") cannot be entered.
•
While being entered, the characters of the
encryption key are displayed, but once the
settings are saved, all the characters will be
displayed as asterisks (*), and you will no
NAT Traversal Service User's Guide
][ ] to select "Admin".
][ ] to select "ON".
17